- or
No existing idea results
- ~ No ideas found ~
4709 results found
-
NZ GST Return- Ability to only show a single line per invoice on the Transactions report
When running the GST Transactions Report, each and every line from each invoice is reported separately, creating a ridiculously large report.
Perhaps there could be one single line per invoice, reporting the total GST for that invoice? Like it used to be?Thanks
3 votes -
Bank rule - Ability to set up overpayments to a supplier
We have standing orders set up for multiple properties for water rates, business rates, electricity and rent all of which are invoiced quarterly/six monthly/annually.
Can we have the ability to create bank rules for supplier overpayments to a contact??
4 votes -
Income and expenses by contact - Filter using tracking category
We run multiple branches out of one Xero ledger. We find the income and expenses by contact report very handy to track sales data, however it would be much more useful if we were able to filter by tracking catagory (for our instance we track branch locaiton).
7 votes -
Projects - Ability to assign to estimated expense category from the bills screen
When assigning a bill line to a project, it would be good to also be able to select the Estimated Expense category from this same screen rather than having to manually add from within the Project. Or at least be able to bulk assign from the Projects screen.
4 votes -
Invoice/Bills - Notification when draft invoice automatically created
Send an email when a draft invoice (or bill) is created automatically.
When a draft invoice is created automatically, I want to be notified. By definition/design, it needs human attention before getting approved and issued. So I would like a human to be told it has happened.5 votes -
UK Payroll - Unscheduled pay run in advance should only stop updates to staff included in the run.
UK Payroll - when an unscheduled pay run has been posted for a period it stops any updates to salaries even when a full payroll hasn't been posted. It makes sense that a full run would stop updates but only people included in an unscheduled pay run should be barred from having updates applied. For instance, with an unscheduled run posted I can't adjust starting dates or salaries for staff, and these may have changed after the unscheduled run was posted.
2 votes -
Find and Recode - Option to change invoices/bills back to draft
Is it be possible to add a section to 'find and recode' where you change status from approved back to draft? It would really help if hubdoc imports a number of documents incorrectly - tthen the fix can be done on bulk transactions
2 votes -
Invoicing - Longer Reference field
It would be better is the invoice reference could allow for input of longer names, without scrolling, so it's all on one line on the invoice.
Currently, the invoice number character length and the invoice reference character length are the same, which seems odd, as usually the invoice number is just a few characters, but the invoice reference can be long (project name, case name etc)13 votes -
GST Audit Report - Page number to appear at top and bottom of screen
GST Audit Report Page number selection to also appear at the top of the screen as well as the bottom of the screen. This would be beneficial to the user so they do not have to scroll down to the bottom of the screen to select what page they wish to review/go to. saving time for the end-user.
7 votes -
sales invoices default landing tabs
When I save/submit for approval an invoice Xero always takes me back to the Sales Invoice "Drafts" tab - it would be great if the default was to take me back to the same tab
1 voteHi Carla, just to check when you say take you back to the same tab would that be the same list view that you started from or the same invoice that you have just saved?
-
AU Tax | Depreciation - Auto populate return when recouped on sale of property
depreciation recouped on sale of property should be populated into the relevant section of the return once it has been entered into the Rant
1 vote -
Sales invoice - Don't auto update email of contact
Is it possible for cash sales/one off payments to chose not to save an email address? Every time I do a one-off cash sale for a new/random customer, the email address automatically saves into the Cash Sale contact file. But the next cash sale invoice is going to a different email address, so while I can input the new email address, the one prior is printed on the invoice! It is getting very tedious having to go into the contact file, delete the previous email address and get back into the new invoice to reprint it every time I do a cash sale - which is a lot!!
It would be great if you could add a prompt that gives you the choice of saving the email address to the client file (or not).Is it possible for cash sales/one off payments to chose not to save an email address? Every time I do a one-off cash sale for a new/random customer, the email address automatically saves into the Cash Sale contact file. But the next cash sale invoice is going to a different email address, so while I can input the new email address, the one prior is printed on the invoice! It is getting very tedious having to go into the contact file, delete the previous email address and get back into the new invoice to reprint it every time I do…
9 votesThanks for your feedback, Carolyn. Appreciate the different use case and why you may not want information from a singular invoice to update the contact. We'll get an understanding of the demand for this here.
In the meantime, it'd be good to understand if recording as Receive money could help your flow here for cash sales so you don't have to enter contact details?
-
Bill Payments - Allow payments to be scheduled
When making a bill payment using open banking direct transfer from bank account, it would be nice to be able to schedule the payment - currently there is no ability to do that.
18 votesHi everyone, we have some updates in the UK with the bill payments method with Crezco. You now have more control of your cashflows with the ability to schedule bills to be paid at a future date using direct bank transfer. This helps to avoid potential bank charges for same day transactions, and missing due dates. Along with this you'll also be able to stay up to date with your payments with real-time payment status in Xero. Meaning you don't have to log into your bank to check the status of each bill payment. With an overview of all payments made using direct bank transfer, you have an accurate record of which suppliers have been paid, and when.
We know there are users from others regions also interested in the idea here and we'll share if there are any updates for expanding similar functionality in other places.
-
Sales Invoicing - Automate 'send me a copy' on invoices
Automate 'send me a copy' on invoices.
Have the option to automatically select 'send me a copy' ticked when creating invoices/repeating invoices.
123 votes -
Bills - Remove compulsory Due Date on bills
Receipts sent to bills do not require due dates, having to have them as a compulsory item wastes a lot of time. Can you make this an Option?
Constantly having to fake a due dates and re-approve is not needed for 60% of bills.
2 votes -
Navigation | Bank Accounts - Drag and drop accounts to move
In Accounting and Bank accounts, i would love to be able to drop and drag bank accounts to put them in order, Currently you have to click each account to move it to where you need it. This is fine if you only have 10 or under bank accounts but if you get to over 100 plus it's a very slow process
2 votes -
Inventory - Create groups/combinations of items
Combo packages as in the required ladies, lawn mower lady weed eater lady trimmer lady and the rakers
16 votes -
Xero Product Ideas - Improve navigation & search
There seems to be a trend to hide the button that is used to post a discussion or submit a product idea amongst others. It appears that you click on a link that you think should take to the "submit new product idea" page, and when you get there and enter in your idea, you realise it was a search box that is searching for existing ideas. Fair enough, force me to search first, patronising but I guess it reduces Xero's workload (not mine though). But where is the button to submit the product idea? And how do I get rid of that drop down search box so that I can see if the submit new idea button is behind it? After some time, I discover that to submit a new idea, I need to
1) ignore the search box that I am presented with,
2) click on the "Browse Ideas" button which is not intuitive because I was just forced to search through ideas and didn't find one so why would I want to browse ideas now?
3) be presented with another search box that now turns out to be one where you can submit your new idea.
Why make it so hard? And why through implication do you want to misdirect the user?Why use the search box in one page where the user expects it to be used to submit ideas as a search only box and then in another page where the user expects the box to be used for searching only (that's why to get there you need to click the "browse ideas" button), why use that search box as one that can submit ideas?
On the first page, you suggest initially that the user will be able to submit ideas only to teach the user that the box that looks like it should submit ideas doesn't submit them, it only searches.
On the next page, you suggest that the link will take you to browsing through ideas and present another search box but this time, when the user isn't expecting it, this search box can also submit new ideas.
When designing new interfaces, count the number of clicks required and justify each and ever extra click you add to the process. And when justifying, try to ignore things that make Xero's workload easier, because Xero is here not to serve Xero, it's here to serve the users.
With the new product ideas page, change the names of buttons so they accurately reflect what the button will lead to.
When guiding the user (or forcing the user) to search first before submitting, make it clear that is what you are doing. Don't present a search box without clear and express writing saying that before you can submit an idea, we want you to search whether it has been suggested before.
When deciding whether to make the user do something, like search existing ideas, ask yourself whether the user is 1) the best suited person for that job and 2) if it is appropriate to have the user do something that Xero should be doing itself. Xero staff will be much more familiar with the existing new product ideas so they will be able to do a better job searching and will be able to do it quicker. And why would you want to have a user (who you have already frustrated due to the confusing process to submit a new idea) have that user do the search when you know they won't do as good a job and Xero staff will probably have to search for duplicates themselves anyway?
There seems to be a trend to hide the button that is used to post a discussion or submit a product idea amongst others. It appears that you click on a link that you think should take to the "submit new product idea" page, and when you get there and enter in your idea, you realise it was a search box that is searching for existing ideas. Fair enough, force me to search first, patronising but I guess it reduces Xero's workload (not mine though). But where is the button to submit the product idea? And how do I get…
4 votesAppreciate the feedback, Martin. As you noted you do need to search ideas first and to create one you'll need to enter a forum and search where you'll then get an option to Post a new idea if lone of the results doesn't match what you're after.
Understand how this could be simpler and while we don't have any immediate plans on this, we;ll update you here if any are made.
-
AU Payroll - Show number of employee's allowed depending on subscription
Display number of employee's allowed depending on the subscription they're on, in the Employee list screen.
3 votes -
Find and Recode - Grand total for line total column
When using find and recode it would be helpful to show the grand total of the line total column at the bottom. This way you know if the isolated transactions in your Excel worksheet matches with all the conditional filtered transactions in find and recode.
4 votes
- Don't see your idea?