- or
No existing idea results
- ~ No ideas found ~
4697 results found
-
Sales Invoices | Imported from WFM - Assign Contact Currency default
WorkflowMax has no understanding of foreign currencies. We now have WFM clients that are being invoiced in either Australian or US dollars as opposed to the standard NZ dollars.
Before sending the invoice from WFM, we set up the contact in Xero to have the following information:
Under Financial Details: Currency = US Dollar
Under Sales Defaults: Sales GST = Zero Rated and Branding Theme - US Invoice
Please see two attachments showing the settings.When we send the invoice (Approved) from WFM to Xero, the GST and Branding Theme are correctly picked up but the Currency setting in Xero is ignored. In Xero, the currency of the invoice must be manually changed from NZ dollars to the foreign currency the customer is using. Xero should also use the Currency setting specified and then the invoice can be sent without doing any further changes.
WorkflowMax has no understanding of foreign currencies. We now have WFM clients that are being invoiced in either Australian or US dollars as opposed to the standard NZ dollars.
Before sending the invoice from WFM, we set up the contact in Xero to have the following information:
Under Financial Details: Currency = US Dollar
Under Sales Defaults: Sales GST = Zero Rated and Branding Theme - US Invoice
Please see two attachments showing the settings.When we send the invoice (Approved) from WFM to Xero, the GST and Branding Theme are correctly picked up but the Currency setting in Xero…
2 votes -
Remittance - Ability to include Check number
Remittance Advice - Show check number for vendors to be able to reference.
2 votes -
Sales invoice - Create project while entering an invoice
Make it possible to create a new project while entering a supplier invoice in a similar way that you can create a new contact if the one you want isn't there. At the moment if we are entering a batch of invoices and there is one that hasn't had a project created we have to create a new one in Projects first before we can continue.
2 votes -
Check Register: Hide previously printed checks
When printing newly created checks it would be nice to have the ability to easily select all for just those new checks by marking all previously printed checks as having already been printed instead of either having to check the box next to each check you want to print or by doing a search by date (if you print checks once daily) to be able to then select all to print.
3 votes -
Invoice Payment - Automatically asking customer to register Auto pay
I will like an option that will force customer to register to Auto Pay.
All our customers agreed to use Auto Pay and most of them "forgets" or "don't see" the Auto Pay checkbox option. So, what happens, they pay thinking they have subscribed to Auto Pay.
This option will make our billing management so much easier.
A quick fix to that issue could be the following:
When they select the button "Set up auto pay", then the Auto Pay checkbox should at least be already selected.8 votes -
Blank Reports - Apply common date formats
I am having some difficulty with "Blank Reports". I designed a small divisional report which included only a small percentage of my P&L accounts. I tried to select a date range which is offered but doesn't work - the only date range that works is the current financial year. If you want to look at last month, last quarter etc - no luck.
When I brought this to the attention of Xero, their response was that feature isn't available - then why is it a report option. Their suggestion was to modify the P&L format which has date options that work - the problem here is they don't allow you to delete lines.
As Accountants and Business Managers we may want to design specific report for various divisions, projects etc and select only certain lines that are available in either the P&L ( as is my case) or maybe the Balance Sheet which I haven't delved into yet
Thoughts ??
I am having some difficulty with "Blank Reports". I designed a small divisional report which included only a small percentage of my P&L accounts. I tried to select a date range which is offered but doesn't work - the only date range that works is the current financial year. If you want to look at last month, last quarter etc - no luck.
When I brought this to the attention of Xero, their response was that feature isn't available - then why is it a report option. Their suggestion was to modify the P&L format which has date options…
1 vote -
Invoice - Show and calculate margins on sales quotes and invoices
Calculating both quotes & invoices, and showing a margin based on unit cost and price, and also setting a price based on a required margin.
Purpose: save time when checking and calculate the costs.
55 votes -
GST - Enable AIM tax method
Enable AIM tax method for NZ
This is needed for small businesses in NZ to do their own AIM lodgement automatically via Xero without using an accountant. In the GST return, there are three options currently; Standard, Estimate, and Ratio but not AIM. The whole purpose of AIM is to smooth cashflow and make it simpler for small businesses to file one return for both GST and Income Tax at the same time, but it appears this option is not available to us! Please vote for this to be included ASAP as an option.9 votes -
AU Payroll - Show opening balances for annual leave on payslips
AU pay slips - show opening balance for each leave type on a pay slip i.e.
- Annual Leave
- Personal / Carer's Leave
- Long Service Leave
3 votes -
Financial Statements | Schedule in Notes - Ability to change column headers
I would like to put fixed asset categories (plant and machinery, motor vehicles etc) as the columns, and have Cost, Depreciation, NBV - bfwds and cfwds etc in the rows underneath. See attached.
As far as I was aware it was standard to have the fixed asset note in this format so was surprised this was not already a functionality,
5 votes -
Bills - Allow the ability to enter .01 instead of having to enter 0.01 in Total field
Fix the Bill Total field to allow regular number input ability.
Specifically, allow the ability to enter .01 instead of having to enter 0.01 which is very unnatural. So, disable/remove the logic that requires the Bill Total entered to start with a number.
Use Case
- We get numerous invoices with a $0.01 total where the product may be an allocation or new line incentive. I constantly get a Bill Total mismatch because I enter the Bill Total as .01 which results in $1.00 bill total instead of the expected $0.01 bill total.
Secondary to this primary fix - Allow calculation in the Bill Total field, the same as the line entry does. I will say, I understand the logic for not having this field be able to calculate, but there are circumstances where it would be useful.
EG - A bill is offered with a payment terms discount and you want the invoice total representative of the Bill Total less the discount. CR Notes for Invoices/Bills is another common place where the Total field being able to accept calculations would be useful.
Fix the Bill Total field to allow regular number input ability.
Specifically, allow the ability to enter .01 instead of having to enter 0.01 which is very unnatural. So, disable/remove the logic that requires the Bill Total entered to start with a number.
Use Case
- We get numerous invoices with a $0.01 total where the product may be an allocation or new line incentive. I constantly get a Bill Total mismatch because I enter the Bill Total as .01 which results in $1.00 bill total instead of the expected $0.01 bill total.
Secondary to this primary fix - Allow…
1 vote -
AU Payroll - Duplicate pay items
Function to duplicate a pay rate category.
For example, we have 1st, 2nd and 3yr apprentices, all on different base rates of pay, plus they also have different rates of pay for day shift, night shift, working on site, working in the workshop etc. XERO doesnt allow me to only calculate super on ordinary hours when i have so many different pay categories as it cant determine just 'ordinary hours"... so for each of those rates i need to have sub categories.... Onsite day shift - OTE and Onsite day shift - ADDITIONAL HOURS Onsite night shift - OTE and Onsite night shift - ADDITIONAL HOURS etc etc. it means my pay categories go from 25 to over 50.... Being able to clik on a pay category and duplicate it, add the word "OVERTIME HOURS" or "ADDITIONAL HOURS" to it, and change the super to exempt would be heaps quicker than having to type each pay categoryFunction to duplicate a pay rate category.
For example, we have 1st, 2nd and 3yr apprentices, all on different base rates of pay, plus they also have different rates of pay for day shift, night shift, working on site, working in the workshop etc. XERO doesnt allow me to only calculate super on ordinary hours when i have so many different pay categories as it cant determine just 'ordinary hours"... so for each of those rates i need to have sub categories.... Onsite day shift - OTE and Onsite day shift - ADDITIONAL HOURS Onsite night shift - OTE and…1 vote -
Organisation settings - Invite other users to demo company
Being able to invite users to the demo company so that we can see how the system we are setting up works.
10 votes -
Bank Reconciliation | Stripe - Add an option to set 'only match' with the reference
We integrate with Stripe for payments and we reconcile our Stripe payments every day to invoices that we generate automatically via a script. On average, we reconcile 50 to 100 invoices each day to Stripe payments. The issue we have with Xero is that the Xero algorithm looks at the amount, the name (customer), OR reference (invoice, order, etc) to match payments with invoices. Like many businesses, our sales price is the same across many accounts and we sell many of the same products over and over to the same customers so this renders the Xero algorithm useless for an exact match. IOW, when we reconcile payments to invoices, the vast majority of payments will match 2 or more invoices, sometimes as many as 20 or more. It would be WAY better if we could set the match to be more precise so we don't have to search. An option to ONLY MATCH the reference would save me hundreds of clicks each day.
We integrate with Stripe for payments and we reconcile our Stripe payments every day to invoices that we generate automatically via a script. On average, we reconcile 50 to 100 invoices each day to Stripe payments. The issue we have with Xero is that the Xero algorithm looks at the amount, the name (customer), OR reference (invoice, order, etc) to match payments with invoices. Like many businesses, our sales price is the same across many accounts and we sell many of the same products over and over to the same customers so this renders the Xero algorithm useless for an…
5 votes -
Online Invoice | stripe - Allow customer to save their card on file when making payment
I'm invoicing through Xero and I want to allow customers to save their card on file in my stripe account when they pay an invoice.
This way, we can bill them again in the next cycle. We deal with metered pricing, so the value of the invoice is different each month based on usage.
7 votes -
Contract management
Create a full document management suit that links into invoicing including agreed increases reminders and renewals. Look at a integrated solution with online signing ability like Videosign: https://www.videosign.co.uk/
7 votesAppreciate the idea, Stephen. Being quite honest this isn't something we're looking to expand to anytime soon.
That said always good to track the interest and get a sense of this interest in this specifically.
However, in the meantime I'd highly encourage exploring connections through our Xero App store.
-
Bank Rules - Mix 'Any' and 'All' rules
When setting up bank rules there are times when the flexibility of a string search is great and ANY should be applied, but some times a amount limit is needed to distinguish different nature of the spend. EG small spend at a service station might be a drawing rather than a fuel item.
1 vote -
UK Payroll - Include opted-out employees in PAPDIS pension file
PAPDIS Pension reports for submission should include ALL employees not just those who have not opted out as the pension provider (creative) I submit to need all the information as they do the pension assessment on everyone every month. I have to manually edit the csv downloaded every month which can lead to mistakes.
1 vote -
Permissions - Control user access to Xero Files
Adding security measures to the file tab - so only certain users can open and access that information
5 votes -
Account transaction report - Add YTD balance column
It would be so helpful to have a YTD column in the account transactions report. I run this report monthly for certain sales accounts to give to our marketing department and need the monthly amount and also the year to date amount however this report only allows me to show the period selected. This means I have to run 2 reports, one showing the monthly account transaction total and then one showing the year to date account transaction totals which I then combine in excel. Would also be good if there was a comparison to budget column.
5 votes
- Don't see your idea?