- or
No existing idea results
- ~ No ideas found ~
4737 results found
-
Bank Reconciliation - reconcile transactions for multiple bank accounts at a time
I'd like the Reconcile pages to allow me to select some all of my bank accounts to display. This would aggregate the unreconciled statement lines and display them all in date order to be reconciled all the same time.
Reason 1: Convenience. I use several bank accounts and would prefer to reconcile all of the transactions in one go.
Reason 2: Error reduction. The most common error I see relating my clients' bank balances is their misuse of Transfer (setting the wrong account, using it for accounts that aren't linked etc.). If they could see both accounts and therefore both sides of the transfers it would greatly reduce these errors.
I'd like the Reconcile pages to allow me to select some all of my bank accounts to display. This would aggregate the unreconciled statement lines and display them all in date order to be reconciled all the same time.
Reason 1: Convenience. I use several bank accounts and would prefer to reconcile all of the transactions in one go.
Reason 2: Error reduction. The most common error I see relating my clients' bank balances is their misuse of Transfer (setting the wrong account, using it for accounts that aren't linked etc.). If they could see both accounts and therefore both…
8 votes -
Bills - Ability to Reject bills, with a Note for the reason
Ability to reject a Draft Supplier Invoice and send a email to the supplier with why their Invoice was rejected.
To often, I receive invoices from Suppliers of whom have forgotten Purchase Order details or have missing information.
There is obviously the option to Approve an Invoice, nut nothing to reject.
I would like a function where I can Reject an Supplier Invoice and respond to the Supplier with why Invoice was rejected and this information is stored against the supplier and shown as a note on the Supplier History or.Would also be handy if there was icon or able to be displayed against Draft Invoices which indicate if a invoice has been Rejected etc.
Ability to reject a Draft Supplier Invoice and send a email to the supplier with why their Invoice was rejected.
To often, I receive invoices from Suppliers of whom have forgotten Purchase Order details or have missing information.
There is obviously the option to Approve an Invoice, nut nothing to reject.
I would like a function where I can Reject an Supplier Invoice and respond to the Supplier with why Invoice was rejected and this information is stored against the supplier and shown as a note on the Supplier History or.Would also be handy if there was icon or…
4 votes -
AU Payroll - Add expire date for Time Off in Lieu
According to different awards Time off in Lieu is suppose to expire in 6 months time if not used. Currently you can only bank and take Time off in Lieu. It would be great if Xero could automatically expire hours not used as this is a common practice in many employee Awards.
5 votes -
Projects - Visual Dashboard for Projects overview and at a glance review
XERO Projects could do with a massive update!
Similar to the main dashboard XERO Projects could also do with a dashboard where you can see a quick overview of what is due in the coming weeks, what is overdue, what is assigned to me, or what is assigned to staff I manage. What projects are in draft status and what projects are 'in progress'. Projects with amounts that need to be invoiced and projects where allocated hours to tasks have been exceeded or amounts allocated to estimated expenses have exceeded.
In other words a dashboard that gives a nice visual that shows where all your projects are at and anything alarming is right there to see.
Maybe a calendar view of projects, which could be clinked on to expand to see more dates/days. Or a Gantt Chart view of projects. Just more ways to view where all the projects are at in a short amount of time. Not just one big long list to look through.
XERO Projects could do with a massive update!
Similar to the main dashboard XERO Projects could also do with a dashboard where you can see a quick overview of what is due in the coming weeks, what is overdue, what is assigned to me, or what is assigned to staff I manage. What projects are in draft status and what projects are 'in progress'. Projects with amounts that need to be invoiced and projects where allocated hours to tasks have been exceeded or amounts allocated to estimated expenses have exceeded.
In other words a dashboard that gives a…
32 votesAaah I see, thanks for the clarification, Emma. Understand the difference between what you can get with the existing reports and what you're in need of.
I've shared with our Projects team. We're continuing to add Projects and while there's no plans at present I'll let you know if anything surrounding this is explored we'll share with you here. 🙂
-
User role - Restrict option to add or delete Bank Accounts To Subscriber user role
It is concerning that Bank Accounts can be added or deleted by users with "Standard User Access or even "Advisor" in some cases.
Considering the whole Xero Accounting system revolves around Bank Feeds, the ability to add a bank account, activate Bank Feeds or even delete a bank account should only be a function available to the Software Subscriber.
3 votes -
Repeating bills - Due date options to include 'working days' not just 'calendar days'
I have a repeating bill that is set up with the due date 14 days after invoice date. This is fine except the date calculated is 14 calendar days and the bill is actually due after 14 working days. Is it possible to have an option that allows for working days rather than calendar days?
4 votes -
Login page - redirect to ReturnUrl if already logged in
Redirect to the ReturnUrl on the login page if you refresh and have already logged back in, eg. from another tab.
Context: I usually have many Xero tabs open. If I am logged out due to session timeout, all of these tabs redirect to the login page with a ReturnUrl in the query string. If I log in on one of those login pages, I am correctly returned to where I was in that tab. If I refresh another one of the tabs after logging in, it stays on the login page rather than automatically redirecting to the ReturnUrl.
It appears the only solution currently is to re-log in to each of the tabs even though I'm already logged in. Otherwise I lose my place in all of those tabs.
Redirect to the ReturnUrl on the login page if you refresh and have already logged back in, eg. from another tab.
Context: I usually have many Xero tabs open. If I am logged out due to session timeout, all of these tabs redirect to the login page with a ReturnUrl in the query string. If I log in on one of those login pages, I am correctly returned to where I was in that tab. If I refresh another one of the tabs after logging in, it stays on the login page rather than automatically redirecting to the ReturnUrl.
It…
2 votes -
Foreign currency - Change exchange rate behaviour
Re: Handling of Mutly-currency/translating foreign currency amounts into the functional currency
Multy currency is currently not fully supported in xero.
A foreign currency transaction should be recorded initially at the rate of exchange at the date of the transaction and then, at each subsequent balance sheet date, foreign currency monetary amounts should be reported using the closing rate.
This is true in xero only for Bank accounts, accounts receivables and payables set in foreign currency but not for other account.
As a result users are required to input periodical manual adjustments at each balance sheet date.We ask Xero to take in consideration such issues, to review them and take action now.
Re: Handling of Mutly-currency/translating foreign currency amounts into the functional currency
Multy currency is currently not fully supported in xero.
A foreign currency transaction should be recorded initially at the rate of exchange at the date of the transaction and then, at each subsequent balance sheet date, foreign currency monetary amounts should be reported using the closing rate.
This is true in xero only for Bank accounts, accounts receivables and payables set in foreign currency but not for other account.
As a result users are required to input periodical manual adjustments at each balance sheet date.We ask…
88 votes -
UK Payroll - Coding of Direct Employer NI and Direct Pension costs
In the Payroll software, we can only allocate Direct wages to the cost of sales. Unfortunately, that doesn't include Employer NI nor Employer Pension cost in the cost of sales.
Such coding would be useful, as we now use Birghtpay to do such coding.
Without this feature, the gross profit margin and overheads are incorrect.3 votes -
Bills to Pay: Transfer attachments when converting Purchase Order to Bill
When converting a Purchase Order to a bill it would be great if there was a way of transferring any PDFs attached to the PO to the Bill. At the moment you need to remember to do this manually.
32 votes -
Bank Feeds - Get daily feeds for weekends and public holidays
Daily Bank feeds from all banks to Xero for the weekends & public holidays now that transactions are done then and it puts our bank rec out.
8 votes -
Reports - display currency symbol
Why doesn't Xero display the currency symbol (like a $) in any of the financial reports like Balance Sheet, Income Statement, etc.? We get only the plain numbers without knowing they are in U.S. dollars (in my case) and make these basic financial reports harder than necessary to read.
19 votes -
Purchase Orders - Don't clear Delivery Instructions field when changing Delivery Address
I sometimes(Often) do not understand Xero's Developers Logic...
Purchase Order - Instructions Field. Can someone explain me why, If I change the "Delivery Address", the form automatically clears the Instruction field we just typed?
I first assumed that it was because I can attach specific instructions for a Delivery address... But I search high and low and I could not find such feature.
Xero, Please BE CONSISTENT.
If there is nothing to fill that Field, Do not erase it just to irritate us.
Better: Add an Instruction field to Contact delivery address. And fill the Purchase order Instruction Field automatically. This would allow us to make sure we are consistent for our customers with comments like: "Truck Lift Gate required." or specific Delivery hours for some vendors...
I sometimes(Often) do not understand Xero's Developers Logic...
Purchase Order - Instructions Field. Can someone explain me why, If I change the "Delivery Address", the form automatically clears the Instruction field we just typed?
I first assumed that it was because I can attach specific instructions for a Delivery address... But I search high and low and I could not find such feature.
Xero, Please BE CONSISTENT.
If there is nothing to fill that Field, Do not erase it just to irritate us.
Better: Add an Instruction field to Contact delivery address. And fill the Purchase order Instruction Field automatically.…
3 votes -
Reports - Supplier/customer ledgers showing exact credit/debits
I find it unacceptable that Xero cannot give a report with the exact debits and credits on the supplier / customer account without showing how the allocation was done. If there are 2 invoices of a 1000 and 1 payment was made of 2000 - I want to see it exactly like that on the report and not 1000 allocated to the first invoice and 1000 allocated to the second invoice. This is standard in Pastel.
7 votes -
User - Bank feed refresh for read only users
We have bureau licences with read only access for clients - however when the bank feed drops they are unable to refresh without upgrading. As they have no other involvement it does not make sense for them to have upgraded access - can we allow them to do this on a slightly improved access level please?
5 votes -
Bank Rules - Add condition for transaction type
Bank Rules - Add condition for Transaction Type (and other Statement Details)
Sometimes loan payments only come through with the loan number as the payee, but the transaction is for Interest only. I want to be able to set up a bank rule based on the "Transaction Type" coming through in the bank feed so that Interest and Principal payments can be coded directly to the correct codes. Most banks have these details in one of "Payee", "Description", or "Reference". ANZ bank does not, there may be other banks that are similar.
I have tried to add criteria for this in "Any text field", but it does not work.
Bank Rules - Add condition for Transaction Type (and other Statement Details)
Sometimes loan payments only come through with the loan number as the payee, but the transaction is for Interest only. I want to be able to set up a bank rule based on the "Transaction Type" coming through in the bank feed so that Interest and Principal payments can be coded directly to the correct codes. Most banks have these details in one of "Payee", "Description", or "Reference". ANZ bank does not, there may be other banks that are similar.
I have tried to add criteria for this…
14 votes -
Invoices: Receive a notification when customer has viewed invoice or quote
To receive a notification when customer has opened or read quote or invoice. That way you know they have been received and there is less emphasis on following up.
37 votes -
Find and Recode - Sort on Find and Recode by description
being able to sort by description on find and recode
112 votes -
AU Payroll - Type and search in the Employee filter
The current screen and filters for Xero timesheet is not user-friendly. In particular, firstly, it would be great if the Employee Name filter allowed you to type and search. Secondly, if the Employee Name filter could include multiple names that would be useful.
Lastly, not in the filters, but the tick boxes for each timesheet - if the tick box was bigger and next to the line, instead of in the timesheet line this would help. The way it is at the moment, it is too easy to accidentally go into a timesheet instead of ticking it to select for bulk approval.The current screen and filters for Xero timesheet is not user-friendly. In particular, firstly, it would be great if the Employee Name filter allowed you to type and search. Secondly, if the Employee Name filter could include multiple names that would be useful.
Lastly, not in the filters, but the tick boxes for each timesheet - if the tick box was bigger and next to the line, instead of in the timesheet line this would help. The way it is at the moment, it is too easy to accidentally go into a timesheet instead of ticking it to select for…2 votesThanks for raising with us in Product Ideas here, Yana. It helps to have each idea separate so others know what they're adding their vote for and we can share the demand of each back with our product teams. I've slightly amended the title of your idea here to fit your first idea.
In terms of employee selections this is actually already possible - From the timesheets filter just click on the names on the employees you'd like to filter timesheets for.
We don't appear to have an existing idea for your 3rd point, but welcome to start a new idea so we can begin to track interest of this, too.
-
Invoice - Add a page break to standard invoices
Invoicing - Ability to insert a page break in long invoices
Some of our invoices have long narrations with multiple lines. At present if one of your line items goes over to a second page you have no ability to define where the page break should be. It would be a great feature to be able to place a page break at any point in the invoice.
7 votes
- Don't see your idea?