- or
No existing idea results
- ~ No ideas found ~
4881 results found
-
Bills - Bulk add Due Date when creating bills from Purchase Orders
Draft Bills - BULK add Due date when bulk approving.
- need to use when creating RCTI's from purchase orders. We have the option to bulk move from Purchase order to Draft Bill, but then must open each one individually to apply the due date so that they can then be approved.Another alternative is to add a 'due date' field on the screen when choosing to transfer the Purchase Orders to the Draft Bill page
2 votes -
UK Payroll - Adding Employee Group data to reports
You can enter a group for an employee on the employment information but this function cannot be used on the reports.
If the information of which employee is in which group, then surely its not a huge leap to add this function to the reports. Using the gross to net report, you could select a group rather than an individual, saving a lot of time.
15 votes -
UK Payroll - Ability to have national minimum wage checker
Xero checks employees age against pay rate and that of the National Minumum Wage so it does not get missed. It's doesn't have to change it, just highlight thsat the employee's rate needs to ber changed
123 votesHi everyone, as part of the work we're doing here, we're looking to engage some small businesses as well as accountants and bookkeepers who use our Payroll functionality to try out our new prototypes and give us feedback.
We'd look to set up a video call over the next 3 weeks which'll take about 60 minutes. If you'd be interested in taking part, please apply by using this form. 😊 Thanks
-
AU Payroll - Ability to remove leave types incorrectly assigned
Need to be able to remove a leave type for employees. Ie an employee is entitled to 4 weeks annual leave p.a.. They have renegotiated their contract and are now entitled to 5 weeks AL p.a. I've set up a new leave type to accrue 5 weeks p.a. for this employee and asked that they use this option when submitting future requests. I have changed the AL 4 week code to No Calculation for this employee, however it still appears as an option when they request leave. I would like to remove this as an option because they continually inadvertently select this type which puts it into negative.
Need to be able to remove a leave type for employees. Ie an employee is entitled to 4 weeks annual leave p.a.. They have renegotiated their contract and are now entitled to 5 weeks AL p.a. I've set up a new leave type to accrue 5 weeks p.a. for this employee and asked that they use this option when submitting future requests. I have changed the AL 4 week code to No Calculation for this employee, however it still appears as an option when they request leave. I would like to remove this as an option because they continually inadvertently…
17 votes -
Payroll - link payroll item to an asset account
At present it is impossible to link a payroll item to an Asset Account in GL. This is a limitation that is wrong and should be easy to fix. It is wrong because in some cases the wages are capitalised (for instance when the resources are used in full or in part to construct capital assets). Sure, it is possible to post a journal to move costs from P&L to a Balance Sheet account but it is cumbersome and error prone. I note, a majority of competing products do not have this limitation.
4 votesHi community, while we appreciate you sharing in the idea here we don't have any plans for developing this capability in the global Pay run product. Instead, we'd recommend using a manual journal to record this.
-
AU Payroll - Create a shared Calendar
Integration of all employee leave taken with a shared calendar in outlook or calendar in Xero itself that everyone can view to see who is on leave and when.
45 votes -
Financial Accounts - Switch rules effect notes
Would like to see switch rules work in the notes to the financial accounts the same way they work on the balance sheet - allowing for reclassification of accounts with negative balances, for example negative current asset to current liability or negative non-current liability to move to non-current asset.
These issues are particularly acute when an account goes from positive to negative and vice-versa between current year and prior year.
On the basis the switch rule does not operate correctly in the notes to the financial accounts, means that in many cases the switch rule is rendered an unusable feature - as switch rule will work in balance sheet but not in notes to financial accounts.
Would like to see switch rules work in the notes to the financial accounts the same way they work on the balance sheet - allowing for reclassification of accounts with negative balances, for example negative current asset to current liability or negative non-current liability to move to non-current asset.
These issues are particularly acute when an account goes from positive to negative and vice-versa between current year and prior year.
On the basis the switch rule does not operate correctly in the notes to the financial accounts, means that in many cases the switch rule is rendered an unusable feature…
48 votesHi community, I'm Brigitte, a Senior Product Manager from our Xero reporting team. We’re doing some research on how partners manage notes in Y/E financial reports, and we’d love to hear about your current workflow using report templates.
How you can help:
- This conversation will take about 30 minutes via video call
- We'll ask you to share your screen to walk us through your current process of preparing/reviewing notes
If you're interested, please use this link to choose a time that best suits you.
If none of the available times work, just reply to my update with a preferred time, and we’ll do our best to accommodate!
We greatly appreciate your constant support & valuable input for the reporting team! Thanks so much.
-
AU Payroll - Hide Long service leave balance from ineligible employees
I would like to be able to select only certain employees and add LSL balances on their payslips rather than everyone in the organisation.
My point is, when we set a new employee we started calculating their LSL from day one but we do not necessarily want them to see the balances until they reach 5 or 10 year mark working for the company.
In this case, calculation of LSL is accurate as in 10 years times hours of employees can change btw full time/part time and so on.
I would appreciate an option to select individual employees to display their LSL balances once they reach the right time on their payslips.Thank you.
I would like to be able to select only certain employees and add LSL balances on their payslips rather than everyone in the organisation.
My point is, when we set a new employee we started calculating their LSL from day one but we do not necessarily want them to see the balances until they reach 5 or 10 year mark working for the company.
In this case, calculation of LSL is accurate as in 10 years times hours of employees can change btw full time/part time and so on.
I would appreciate an option to select individual employees to display…11 votes -
AU Payroll - Include Salary Sacrifice amounts when calculating HECS/STSL deductions
When a staff member has a HECS debt or other Student Loan selected AND is salary sacrificing - the Student loan amount is only calculated on the GROSS amount AFTER the salary sacrifice however when the staff member has gone to do their tax return, they have a tax bill because the ATO looks at the taxable income as an amount INCLUDING the salary sacrifice so via Xero not enough PAYGW has been withheld - can this be amended?
3 votes -
NZ Payroll - More employee bank accounts fields
More than four bank accounts for employees: It would be helpful if we could have more than four bank accounts for employee wages to be split into. A minimum of 6 would be good as a few employees have asked for money to be split into more than four accounts.
3 votes -
Projects - Expense Date to be shown on the invoice
Add an expense date to a project
When you enter expenses under projects, a date is required. We would like that date to appear on the invoices.
10 votesWhen you say you'd like the expense date on the invoice - would you expect this to be visible just in Xero, or o your customer as well?
-
Projects - Create Spend Money from a Project expense
When adding a actual expense within a project it should open a spend money transaction in Xero and have the ability to save photo of the receipt as normal spend money. Or alternative within the XERO app be able to select a project when inputing a receipt, the current setup is double handeling because you purchase somthing and you have to enter it in xero then in the project.
2 votes -
Bank Reconciliation - Match payment to more than 50 invoices
I would like to see the limitation of receiving payment on 50 inovices be increased or removed completely. I Have a trucking company that issues hundreds of trip invoices to it's customers and the limit of receiving payment on 50 invoices at a time doesnt work for them.
5 votes -
UK Payroll - Employee salary reports
In order to review salaries, it would be extrememly helpful to be able to generate a report with employee names and annual salaries
19 votes -
Proforma Invoice - Ability to apply part payments before converting to invoices
Ability to create a separate proforma invoice function which allows you to make part payments against the proforma invoice, before being able to convert it to a sales invoice.
Purpose: Users can easily manage part payments before sending their sales invoices to their contacts.
121 votes -
Bills - Include supplier's tax ID on the PDF for US region
The supplier address is shown on the PDF bills, not the tax ID. Please include the tax ID in the bills for US region.
2 votes -
Reporting - Balance sheet to switch only individual accounts when applying switch rule.
When the Switch rule is set for an account group in Balance Sheet, only individual accounts with negative balances are moved. Please allow option to switch for the whole account group, not individual accounts only.
3 votes -
Fixed Assets - Quick asset creation from supplier Bill
When an Item is purchased, make it an easy step to turn the purchased item into a fixed asset rather than inventory.
2 votes -
Reporting - Set 'Working capital with other cash movements' report to be default for the Cash Summary Report
I need to include a Cash Summary report and bank summary report in standard management reports.
I need the Cash Summary report format - working capital with other cash movements. I never use the default report. It includes balance sheet items as expenses and has little meaning for the clients I have viewed this for.
At the moment, this can only be done on an individual client level and laboriously. This is not viable for my office.
2 votes -
Expenses Report - Including billable expense assignment
Would really appreciate the ability to export expense claims for an individual employee for a defined period which shows which are billable to a client and those that are not.
Currently the Expense Claim Detail report only shows aged (unpaid) expenses and the Account Transactions Report shows all expenses whether paid, unpaid or submitted, but doesn't differentiate those that are general expenses from those that can be billed to Clients (Customers).
Hard to believe we are the first small business to request this functionality.
16 votes
- Don't see your idea?