- or
No existing idea results
- ~ No ideas found ~
4614 results found
-
New Invoicing - one click tracking fill from contact default
On classic invoicing, when you click the account category space or the tracking category it would fill in from the contact default, or account default or some default. But on new invoicing it only fills in if you tab.
10 votesThanks for the added detail, Becky. This is good to know when sharing back with the team. While this may be something we look closer at down the line, I want to be open that we don't have direct change planned in the near term.
Understand it's a few more clicks at present, potentially to save tabbing 8 time clicking on the Tax Rate column and then tabbing once may save a little time atm. Completely get it's not a resolve though.
Account Team - Is it possible that this would be when you're copying an invoice to a new draft invoice? If so, and you select the same Contact defaults aren't automatically applied and you'd need to remove and re-add the contact on the new draft invoice to trigger defaults to be applied. Otherwise, I'd recommend raising a case with our team of specialists for a closer look as to why these aren't pulling through.
Thanks for the added detail, Becky. This is good to know when sharing back with the team. While this may be something we look closer at down the line, I want to be open that we don't have direct change planned in the near term.
Understand it's a few more clicks at present, potentially to save tabbing 8 time clicking on the Tax Rate column and then tabbing once may save a little time atm. Completely get it's not a resolve though.
Account Team - Is it possible that this would be when you're copying an invoice to a new draft invoice? If so, and you select the same Contact defaults aren't automatically applied and you'd need to remove and re-add the contact on the new draft invoice to trigger defaults to be applied. Otherwise, I'd recommend raising a case with our team of specialists for a closer look as…
-
Files - Create bill credit notes from files folder
You should be able to create a Bill Credit note directly from the FILES folder of your profile. This way when you go in to check the Credit note, you can create it straight away, rather than have to go out, in to Bills, and then have to create it from there.
OR when you send an 'invoice'/attachment through to your draft bills, you should be able to change it to be a bill credit note rather than a bill3 votes -
New invoicing - Issue date end of last month
In new invoicing the drop down issue date is today or tomorrow. I suspect "Yesterday" and "end of last month" would be helpful for lots of businesses who bill the day or month after a job is finished.
11 votes -
New Invoicing - Remove the zeros from the amount field
When entering after Qty field, amount is pre filled with 0.00 and when you type, it will put the amount after e.g 0.00120 instead of 120.00. Please remove the pre filled zeros as with classic invoicing and keep the new invoicing in line with everything else in Xero like bills and spend money etc. It is too different!😒
13 votes -
New invoicing - Make the "Approve" button floating at the top of the screen
We have monthly invoices and we have multiple lines, sometimes 100+. With the new invoicing, the approve button is at the top of the screen and I have to scroll to the top every time I got to check the total prior to approving. Can you please make the 'approve' ribbon fixed at the top of the screen when you scroll down?
4 votesThanks for your feedback, Dane. This isn't something we have direct plans around atm and we'll track the interest in having this option as a floating button, here.
You may find using the 'Home' button on your keyboard helps to quickly navigate back to the top of page for now.
-
UK Payroll - Seamless Payroll Integration with Crezco
To enhance efficiency and save time, it would be highly beneficial to integrate the payroll system in Xero with Crezco Online Banking. This integration would allow wages to be paid directly through Xero, similar to how bills are currently managed. By automating the connection between Xero's payroll system and Crezco, users could avoid the manual process of downloading payroll documents, uploading them to Crezco, and processing payments. This streamlined approach would significantly reduce administrative tasks and improve overall productivity.
3 votes -
DOCX - Show CIS after subtotal
CIS Deductions need to show at the bottom of the invoice on advanced invoice templates as seen on the standard invoice template.
11 votes -
UK payroll - Ability to include additional fields in Pension Contribution Report
Xero cannot current cope with companies that have more than one pension scheme. The upload I need to send to the pension provider includes payroll number, pensionable earnings for period, start date and date of birth. It would be useful if Xero had the ability to add these and additional fields if required customised in the contribution report.
22 votes -
Business snapshot - Link to default custom Profit & Loss Report
Business snapshot - link to default custom Profit & Loss Report
We use a custom Profit & Loss Report which is default.
Unfortunately the Business snapshot links to the standard xero Profit & Loss Report not the custom default Profit & Loss report.
Can the Business snapshot be changed to link to the custom default reports?3 votes -
AU Payroll - Leave Accrual - Correct decimal places to stop over accrual.
Xero uses 4 decimal places when calculating leave accruals. As it doesn't use the standard 5 decimal places, like most payroll software, the amount of leave entitlement that you record from this in the liability account in the balance sheet and P&L expense is more than it should be.
But the bigger problem this is causing is the fact that it is actually giving the employee more accrued leave than they are entitled to.
Even though this is a small amount against each payroll, this will build up very quickly over time and as more & more employees are added, which is not good, especially for small businesses (which is what Xero was initially built for, to support small to medium sized businesses).
Please can you correct this to comply with the government standards.
Xero uses 4 decimal places when calculating leave accruals. As it doesn't use the standard 5 decimal places, like most payroll software, the amount of leave entitlement that you record from this in the liability account in the balance sheet and P&L expense is more than it should be.
But the bigger problem this is causing is the fact that it is actually giving the employee more accrued leave than they are entitled to.
Even though this is a small amount against each payroll, this will build up very quickly over time and as more & more employees are added,…
2 votes -
Quotes - Split quotes into multiple invoices with relationships and automatic “Mark as invoiced” functionality
Our work is often quoted at the project level, with invoices being issued monthly for the duration of the project until the quoted amount has been paid and the project completed.
Currently, we create the quote, and then subsequently create invoices - manually keeping track until the quoted amount has been invoiced, at which point we mark the quote as invoiced.
It would be helpful if;
- We could split the quote into N invoices automatically with the total invoiced amount over N invoices equalling the amount in the selected quote.OR
- When a quote is marked as accepted but not invoiced; have the ability to when creating an invoice, assign the invoice to a particular quote and create some type of useful or navigable relationship between them.
User flow would/could be;
1. Quote is created for £X
2. Quote is accepted
3. Invoice is raised for partial/split payment of £Y and approved (and or sent)
4. After an invoice is no longer draft, it can be assigned/related to a quoteAfter a quotes total amount has been raised as invoices, the quote is automatically marked as “Invoiced” with all related invoices being listed in the “History and notes” section.
Our work is often quoted at the project level, with invoices being issued monthly for the duration of the project until the quoted amount has been paid and the project completed.
Currently, we create the quote, and then subsequently create invoices - manually keeping track until the quoted amount has been invoiced, at which point we mark the quote as invoiced.
It would be helpful if;
- We could split the quote into N invoices automatically with the total invoiced amount over N invoices equalling the amount in the selected quote.OR
- When a quote is marked as accepted but…
2 votes -
Projects - Ability to upload a file to Project
The ability to upload a file into individual projects directly rather than via bill allocation. Would like to be able to upload customer order, for example.
3 votes -
AU Payroll - Add default hours for Public Holiday
Add default hours for Public Holiday's based on the employee's standard work pattern.
3 votes -
NZ Payroll - Employer contribution and salary sacrifice remove option to enter figures in both fields.
figures can be entered into both fields at the same time. It should not be this way. There is not enough explanation as to how the salary sacrifice options work
2 votes -
Reports - Quotes track invoicing
Have a Report that shows all Quotes that have been accepted, but not invoiced. That shows any part invoices that have been raised. We frequently invoice a % upfront, % mid project and then % at the end.
3 votes -
New invoicing - Option to leave date field blank like classic invoicing
In New Invoicing can the Date field be left blank when in draft status as per previously. Regularly I create draft invoices and want to continue to be able to leave the date blank or to put tentative dates in before moving forwards int he process.
32 votes -
Invoicing - Include PDF attachment when emailing invoice
When Xero are emailing out their invoices please can you go back to attaching the invoices as a pdf as it quicker to be able to forward them rather than having to sign in and save them as draft, especially when you are having to do loads for clients.
49 votesThanks for sharing back on this, everyone. We'd like to confirm the way the options works now when sending in new invoicing - This is triggered by previous behaviour.
So, when you send using new invoicing, the selection for 'Attach PDF' is driven by the last invoice you sent. If the last selection was unticked the next invoice you send will automatically be unticked, and vice versa.
What's worth noting is that this is a browser based setting. For example if you change computers or browsers your setting will revert to default where both options are unticked. As you'll see from my recent update on this similar idea this is something we may explore further down the line but we don't have any immediate changed planned for.
We also appreciate your feedback relating to where a customer's taken when clicking Review and pay. Our team have done a lot of research and testing around this flow - finding that businesses that have a payment service attached are likely to get paid faster, along with this taking customers directly to the payment screen has increased the rate at which businesses receive payment.
While it's only shown for some users that have payment services set up at present, we're looking to roll this change out wider to all invoices. We know it can take a bit of getting used to the change but believe that many people will quickly grow familiar with this.
Thanks for sharing back on this, everyone. We'd like to confirm the way the options works now when sending in new invoicing - This is triggered by previous behaviour.
So, when you send using new invoicing, the selection for 'Attach PDF' is driven by the last invoice you sent. If the last selection was unticked the next invoice you send will automatically be unticked, and vice versa.
What's worth noting is that this is a browser based setting. For example if you change computers or browsers your setting will revert to default where both options are unticked. As you'll see from my recent update on this similar idea this is something we may explore further down the line but we don't have any immediate changed planned for.
We also appreciate your feedback relating to where a customer's taken when clicking Review and pay. Our team have done a lot of research…
-
Bendigo Bank logo
Can you please update the Bendigo Bank logo to the new and updated version.
Xero currently uses the old logo.
3 votes -
AU BAS - Lodgment for grouped entities BAS
Where you have multiple legal entities that are able to lodge a consolidated BAS/GST return for the Group, having an ability to lodge the one return from Xero, without having to manually consolidate the various legal entities data outside of Xero via excel or some other means.
4 votes -
UK Payroll - SMP advance
UK Payroll - allow employers who have received SMP advance funding to enter the amount received so that the SMP paid is not recovered, and the correct amount owing to HMRC shows on the Taxes and Filings page.
9 votes
.jpg){kind=link}
- Don't see your idea?