- or
1013 results found
-
Reporting: Archive Custom Reports
In the custom reports menu, if you are no longer using a report but may need it again, the only option is to leave it there or delete. There is no option to archive the report. It would be good to have this option in case you need to refer to the report later.
5 votes -
Invoices - Ability to send Invoices and statement to seperate email addresses
Some purchase contacts have requested that invoices be sent to an accounts email while statements are to be sent to a different email address, both of which are different from the person who is the actual primary contact. It would be advantageous for Xero to incorporate this to allow for the invoices and statements to be sent to the correct emails without the necessity of sending every document to the primary contact or to each other which is not required or desired.
380 votes -
UK Payroll - Calculate pension contributions on pre-SMP earnings
Employer pension contributions for employees on SMP should be calculated on the employee's earnings before they went on leave, not on the reduced rate of 90%. Xero's calculation is currently on the latter with no option to overwrite. The correct calculation would be first choice, but the option to change figures would be helpful also
5 votesHi everyone👋, thanks for the idea and support here. To be open and upfront we don’t have any plans in the near term to expand this functionality.
Right now, you can create an additional Employer Pensions pay item and add it to the employee's Pay Template. When the pay run is processed you'll be able to enter in the difference due, to ensure the total contributions equals the required value. If anything changes in this space, we’ll update you on this idea.
-
UK Payroll - Save and Next option for Timesheet approval
Save and Next option for Timesheet approval.
Rather than having to go back to the beginning for each and every timesheet approval you should be able to save and view next in the same way you can with bills.
5 votes -
Journal - Copy & paste or import manual journals with multiple lines
It would be great to have the ability to copy data from an excel sheet and paste into a journal in Xero (using a relevant template). It can be quite cumbersome to copy and paste individual figures into each row in a journal and/or type them in line by line, especially if there is a large volumes of line items to include!
2 votesHi Geena 👋, you can import journals with up to 300 lines at a time.
More information on how to do this👉 on Xero central
-
Dashboard - Show Purchase Orders
Show purchases orders on the dashboard, as per this thread! Would be really useful to see what is approved but not billed at a glance. https://central.xero.com/s/question/0D51N00004oQgTxSAK/is-it-possible-to-show-your-purchase-orders-on-the-dashboard?t=1652190558049&searchQuery
70 votes -
Payable Invoice Details report - Option to display bank details
Need option to display supplier bank details when running the supplier payments bank report. Key for bank approvers to easily verify bank details for supplier payments.
42 votesSee where you're coming from and thanks for the confirmation, Malcolm (I've just slightly adjusted the title here 🙂)
This isn't something we have planned at present but will get a sense of the appetite here and let you know if there's any change.
-
Expenses: Set default due date
Can we please have the ability to set a due date for an expense? Currently it is set as the day it is approved, but we pay all our expenses for the whole month, on the 15th of the following month. It would be good to be able to set this as default for any expenses raised.
Thanks,
Sarah78 votes -
Sales Invoices - Reference field for each line item
It would be great if the Reference field was moved to the body of the sales invoice so that you could add item line referencing with the option to enable the referencing to print on the sales invoice.
For example, a plumbing business completes work for a customer that has multiple rental properties. If the reference field was in the body of the sales invoice, they could add the applicable property address here so that they and the customer could differentiate what work was completed at each property for the invoiced period.
Currently, you would have to invoice separately for…
21 votes -
AU Payroll - Ability to set a default view for timesheet list
Currently when opening the TIMESHEETS page the order of the timesheets is very random (example attached).
The most common reason for visiting this page is to view and approved/reject timesheets so It'd be very helpful for us when we do open this page that the most recent timesheets awaiting approval are at the top.
Currently we have to click on the 'Last Edited' column header to get the most recent time sheets.
Can we please have this page DEFAULT set up to accommodate most recent date at the top (example attached).
Please join me in my campaign to have…51 votes -
New Invoicing - Alert if the contact has available credit
In the "classic invoicing" interface an alert is displayed at the bottom of approved invoices when the contact being invoiced has existing credit that can potentially be applied to the new invoice. This is a very important feature and strangely it's missing from the new invoicing interface. With the "classic invoicing" now being officially retired this basic feature must definitely carry over to the new invoicing interface.
Without this alert, every time we create an invoice we would need to manually check if the contact has previous credit with us, which makes the process unnecessarily inefficient and unpleasant.
115 votesHi community, we appreciate all the feedback you've shared on how we can improve new invoicing for your needs.
In relation to the alert of available credit as raised in this idea, we've identified there are a few situations for Invoice only users where the available credit pop up isn't being shown. This is something we have plans to fix, and while I can't give a specific date on the idea here, we want you to know this is important to us and I'll keep you updated on progress here.
-
Bank Reconciliation - Option to Save a draft reconciliation for completing later
Reconciling funds - I need to be able to save Reconciling items while I'm half way through reconciling.
eg - I receive large amounts via bank statement - eg $16,000. That $16,000 will be made up of 10 holiday home bookings. Then I break down each booking into cleaning, credit card fees, our company commission, Airbnb commission, etc etc. Sometimes there may be up to 80-100 lines of items. Currently I can not save and it is really frustrating as it can take an hour to do and then if I have to leave or can't reconcile I need to…8 votes -
Tax Rates - Ability to import & export
Ability to import/export tax codes for jurisdictions where multiple non-default tax codes may be required!!!
4 votes -
AU Payroll - Track days off for non-employee contractors
It would be very helpful if we could allocate and track unpaid leave categories for non-employees so we can see when they are going to take holidays.
3 votes -
Bills - Enter multiple bills on one page.
Add a feature where you can capture bulk supplier invoices.
You can select your supplier from a dropdown, type the invoice number, type the description, select to add a file, select account detail (sales account) and type in your amount.
This will save much more time vs opening the supplier account, add new bill, etc, etc, or copying a recent bill and just typing over it ... it's tedious and time consuming the way it is set up now.1 voteHi Louleen, rounding back to your idea here. From what you describe it sounds like majority of the contents of the bills are the same? If so perhaps a repeat bill template could be an option. If you set this to create a Draft bill you could then just review and make any adjustments.
Also if you already have existing bills that need entering you can back date a repeat bill template and dependent on the cycle you set e.g 'repeats every x days' you could spin up multiple bills from one template at once.
-
Permissions - Give Invoice Only users access to Send/Print for approved invoices
Invoice Only User SHOULD have access to "send and print" feature once the Purchase Order were approved. To address this concern, a user should have an access level of Invoice Only + Purchases, however, changing the permission to this level, the inputs made by other users, which might be confidential and unnecessarily to be seen by others, are compromised. I would like to request to add this feature (send and print) for the Invoice Only users.
5 votes -
AU Payroll - Shearers tax scale
Currently you are able to select the tax scale Horticultural/Shearers but there is no default tax rate attached. Apparently if employee falls under this scale you need to select for reporting to ATO which means you have to then manually calculate tax when you do the pays which is not possible if you have multiple employees knowing which employee wants what rate as they all do not use the default. This also leads to errors if not picked up it doesnt calculate automatically. May I suggest that we urgently attention to have the default ATO tax scale rate included with…
19 votes -
Xero UI - Unify date selectors
At a quick count there at least three different date selectors used in Xero. This makes it clunky for users and some date selectors are functionally outdated. Examples, the date selector used in Invoices (best) vs the one used in Reports (worst) vs the one used in Leave.
Use the same date selector(s) across the entire product. One that allows for:
- Keyboard entry of date(s), multiple formats eg 23/08/23 as well as 23 Aug 2023 (Invoices does this)
- Shortcuts like 'This financial year' etc - where applicable
- Quick year jumps (unlike the date selector in Reports…3 votes -
New invoicing - Assign next number in sequence when number removed
We bulk upload invoices in advance with "Draft" invoice numbers as we don't know their ultimate sequence for issue. We then assign a chronological invoice number when the invoice is approved and/or saved. In "Classic" invoicing, if I delete the invoice number it automatically assigned the next number in sequence e.g. #INV-0089, however in "New" invoicing if I delete the invoice number is warns me that I need a number and reverts to the original "Draft" number" and not the next chronological number in sequence. This is a significant backward step in functionality, can you confirm this bug will…
101 votesHi team, we appreciate the added feedback from you on the behaviours from classic that you'd find useful in new invoicing. The invoice number assignment is still a feature that our teams are continuing to monitor closely. Right now, while we don’t have plans for changing the way invoice numbers are assigned, our product teams are considering future improvements - As part of this they are doing some discovery that we’d love to get your contribution to.
We'd like to invite you to share back though our survey here. Insights from this will help our product teams get a deepened sense of our invoicing users. Thanks
-
Xero Me - Allow employees to self-service change of address
Xero Me - change of address - employee can lodge a notification through Xero Me to payroll for your change of address. The change could be approved by the payroll administrator and it immediately updates Xero, then an email would be sent to the employee to say the change of address has occurred. This would reduce administration time, spelling errors in address and encourage employees to keep their details up to date.
54 votes
- Don't see your idea?