- or
No existing idea results
- ~ No ideas found ~
4567 results found
-
Bank Rules - Ability to search by Account Code
It would be very useful to be able to search bank rules for an account code, since account codes cannot be archived/deleted if there is an associated bank rule. I eventually found the relevant bank rule but it was very time consuming to go through each bank rule individually - there can be hundreds of bank rules.
3 votes -
Bills - Temporary pop up after creating bill and view bill opening in new window
A slight nuisance when creating bills, that seems to have started happening as part of the new invoicing 'updates' as I never had these two issues before.
1) There is a certain bill transaction that I add monthly, usually 10-15 per month. The lines are always the same so for speed I always copy one bill to another and so on. Once I add the payment Xero sends me back to the home screen and a pop up appears in the bottom left hand corner to 'view bill'. I click on this to then copy the bill for the next one. However... the pop up is temporary, and if I'm multi tasking, or the phone rings, the pop up disappears pretty quickly and I miss it. This makes it difficult to get back into the flow of things if for example it is a phone call or email interruption, to go back to Xero and remember where you were, as Xero has by then defaulted on the awaiting payments screen and the pop up for the last thing I did has gone.
2) When things are in good flow and I've clicked on the pop up to then copy invoice, it opens in a new window. So when doing this 10-15 times, constantly having to close the old windows.
Before you suggest it, I am aware of repeating bills but this feature isn't suitable for this particular transaction. And the copy bill system worked absolutely fine before, but again as with the new invoicing saga, it's disturbing workflow, adding more clicks, creating more work.
A slight nuisance when creating bills, that seems to have started happening as part of the new invoicing 'updates' as I never had these two issues before.
1) There is a certain bill transaction that I add monthly, usually 10-15 per month. The lines are always the same so for speed I always copy one bill to another and so on. Once I add the payment Xero sends me back to the home screen and a pop up appears in the bottom left hand corner to 'view bill'. I click on this to then copy the bill for the next…
2 votes -
AU Payroll - Ability to set a default view for timesheet list
Currently when opening the TIMESHEETS page the order of the timesheets is very random (example attached).
The most common reason for visiting this page is to view and approved/reject timesheets so It'd be very helpful for us when we do open this page that the most recent timesheets awaiting approval are at the top.
Currently we have to click on the 'Last Edited' column header to get the most recent time sheets.
Can we please have this page DEFAULT set up to accommodate most recent date at the top (example attached).
Please join me in my campaign to have this view improved.
Thanks for your support.Currently when opening the TIMESHEETS page the order of the timesheets is very random (example attached).
The most common reason for visiting this page is to view and approved/reject timesheets so It'd be very helpful for us when we do open this page that the most recent timesheets awaiting approval are at the top.
Currently we have to click on the 'Last Edited' column header to get the most recent time sheets.
Can we please have this page DEFAULT set up to accommodate most recent date at the top (example attached).
Please join me in my campaign to have this…51 votes -
Reporting | Publishing - option to include cover & contents by default
Small request: Include the cover & contents page by default, please.
The following is info from a Support webpage... Publish a report from the Drafts tab. In the Accounting menu, select Reports. Select the Drafts tab. Click the menu icon kebab style menu icon to the right of the report you want to publish, then select Publish.
(Optional) You can apply different publishing style options depending on the type of report:
[Include a cover and contents page] < Can this be marked to include by default instead of having to check mark them to be included every time that I almost always do? >
Small request: Include the cover & contents page by default, please.
The following is info from a Support webpage... Publish a report from the Drafts tab. In the Accounting menu, select Reports. Select the Drafts tab. Click the menu icon kebab style menu icon to the right of the report you want to publish, then select Publish.
(Optional) You can apply different publishing style options depending on the type of report:
[Include a cover and contents page] < Can this be marked to include by default instead of having to check mark them to be included every time that I…
1 voteThanks for your idea, John. We don't have plans for adding an optional default setting for cover and contents atm but we'll begin tracking the interest in this through your idea.
-
Supplier Reminders function
It would be nice to have a reminders function for Suppliers just like with Customers.
We work with a very long list of Suppliers in some of our clients' companies. It could be a nice feature to have scheduled reminders go out to some suppliers that you always have to chase down for invoices/statements.
1 vote -
Cash Summary Report - Include Primary Person
Cash Summary Report to include Primary Person Please.
Can you get a cash summary report to provide in order 3 items as per below
Invoice No ... Contact ...Primary person
I cant seem to find a report for all three .
We send 170 invoices out client who pay sometimes do not include invoice number and we have to track by firm name or contact which can vary also on bank receipt information.
e.g.
I need "Primary person" to help "match" an unidentied payment. so searching for "primary person" identifies the invoice number or the right contact.2 votes -
Bills - Copy transaction lines to a new line
It would be great to be able to copy lines when processing spend money and bill transactions. I need to split costs from a single bill or credit card transaction to locations. Being able to copy data entered to a new line and then change the value if needed and apply the location would save time and limit tedium. Thank you
5 votes -
Batch Deposit - Search and select on Awaiting Payment screen
Currently when selecting invoices to include in a batch deposit you can only select what's on the current screen, when you click to the next screen you lose the selections you made on the previous screen. I have thousands of invoices awaiting payment, even with the max display amount of 200, it's 30+ screens to scroll through. I have to create multiple batch deposits in order to capture everything that's being taken to the bank that day. Please add a search field that will save and allow multiple invoices to be included in batch deposits.
1 vote -
Contact | Branding for all transaction types
Ensure that the branding theme that is assigned to a customer is used to send POs, statements, credit notes, quotes etc ... not just invoices.
4 votes -
AU Payroll - Ability for Business Owner/Payroll Manager to view & complete draft timesheets
We want to be able to open and complete the employees draft timesheet, if it has already been started. We have enough to do without starting again from scratch what the employee may have already done but just not clicked the submit button.
It is idiotic that, as the owner and payroll manager, that we cannot see an employee's draft timesheets.
As the business owner and Payroll Admin, we should:
- not have compromise our recordkeeping by putting hours directly into the pay slip.
- not have to rely on our employees being available to correct the timesheet at any point in time; and
- certainly not have to rely on Xero Support to correct anything (simply because they will never be able to correct it in a timely fashion when we need them to - not their fault, just reality.)
What we should be able to do, is see any and all draft timesheets, regardless of who created them and alter them as necessary without having to mess around, wait on support or interrupt our employees during their down time.
As an employer, the absolute least we can do it make sure that our employees are paid correctly, on time and with the minimum of fuss.
We want to be able to open and complete the employees draft timesheet, if it has already been started. We have enough to do without starting again from scratch what the employee may have already done but just not clicked the submit button.
It is idiotic that, as the owner and payroll manager, that we cannot see an employee's draft timesheets.
As the business owner and Payroll Admin, we should:
- not have compromise our recordkeeping by putting hours directly into the pay slip.
- not have to rely on our employees being available to correct the timesheet at any point in…
172 votes -
AU Payroll - Long Service Leave's Liability calculated and 'live' for reports within Xero
LSL liability calculations are currently handled externally to Xero.
It would be nice to have a system which could automatically track LSL on staff, similar to asset depreciation.4 votes -
Projects - Keep items in the same order when invoicing
When creating an invoice from a project-keep items in the same order as they appear in the project. It is very confusing when all the items are in different places than they were in the project and I have to reorder everything.
2 votes -
Invoice list view - Add View Option
View Invoices in the Invoices menu - Add View Option
3 votesHi community, thanks for your insights on how this feature would be useful to you within Sales invoices. Being open we don’t have direct development for this planned atm, however our product teams are doing some more discovery in this space and we’d like to invite you to feedback through our survey here. Your input would be really valuable to the team as they get a deepened sense of our users for future improvements.
-
Reconcile period - Tab from Start date to end date
Fix Tabbing issue when creating reconcile period. When creating a reconcile period I enter the first date of a Statement Date Range, hit tab and instead of going to the last date of the Statement Date Range where it should go, it weirdly tabs to the opening statement balance, forcing me to go back and click on the ending date box.
1 vote -
Quotes - Feature to hold Supplier Quotes
It would be really useful to be able to put my supplier quotes on to Xero as some of my jobs have numerous quotes from different suppliers. It would make it easier to compare them and then generate our own quotes to our customers from these.
1 voteHi Zoe, could you use draft purchase orders as a means to record a quote you've received from a supplier? Once confirmed with your customer you could delete the unneeded purchase orders and create a quote for your customer, or it's possible to Copy a purchase order to a draft invoice which may be an option?
-
Projects Easier way to check items to be onbilled
Projects - Ability to check multiple items to Pass on/Mark up.. Surely its an easy interface fix to create a column in the right hand side next to items so we can check all items to be passed on to the client or that need a mark up. When lines are identical amounts Im going goggle eyed trying to work our which line im up to when clicking on the stupid 3 dots! Fix this please!
2 votes -
Batch Payments - Ability to 'split' when reconciling
Currently a client can upload a number of invoices and then create a batch payment for these invoices. When they make a payment for 1 of the invoices in the batch, you have to remove and redo the payment then match the separate invoice up, and then recreate the batch payment, excluding the amount which has now been paid. Would be easier if like with invoices, the batch payment could be split, saving the new to remove and then recreate the batch payment.
333 votesHi everyone, thanks for the idea and support here. We appreciate all the valuable feedback and ideas shared regarding the ability to split batch payments when reconciling, and understand it currently takes extra steps to reconcile when a single invoice among a batch has been paid, or when there are multiple payments to the same entity for different invoices.
Being transparent, we don’t have direct plans for making this change within the foreseeable future but if anything changes in this space, we’ll update you on this idea! -
AU Payroll - Use multiple pay items for employees annual salary
Currently in XERO if you use more than one Ordinary Time Earnings Pay Item per employee the Annual Salary Calculation on the Payslip is incorrect. Using more than one is useful as there are some employees I like to apportion to 2 x areas. Example: It might be 1 day a week on Admin 4 days on Production. Whilst we can do this currently in XERO, as noted above the Annual Salary is incorrect. So - either - separate the Salary field from the Pay Item or change (fix) the way XERO calculates the Annual Salary. Note I am aware that I can use one Pay Item and then use timesheets for allocations. For my small team it is extra work for no gain.
Currently in XERO if you use more than one Ordinary Time Earnings Pay Item per employee the Annual Salary Calculation on the Payslip is incorrect. Using more than one is useful as there are some employees I like to apportion to 2 x areas. Example: It might be 1 day a week on Admin 4 days on Production. Whilst we can do this currently in XERO, as noted above the Annual Salary is incorrect. So - either - separate the Salary field from the Pay Item or change (fix) the way XERO calculates the Annual Salary. Note I am aware…
1 vote -
Invoicing - Option to copy different parts of invoice when select option to send to self
Copying part of a sent invoice perhaps just invoice number and amount to my e-mail would avoid a problem I had.
My e-mails were hacked and a monthly rent invoice I had sent was copied the next month with amended bank details.
I no longer send copies to my e-mail although now I have to concentrate more so I know which ones I have sent.
This type of fraud has happened to someone else I know - we are more careful with our e-mail security now.2 votesI'm sorry to hear that your email was hacked, Joanne. As you may have seen in other ideas on the site we are working to develop the History & Notes so you'll soon be able to see detail of the email an invoice has been sent too. Doesn't ideally solve for what you're asking here, so we'll continue to track this separately and update if there's any news of having more control of what you can send with the send to self option.
-
Bank Reconciliation - Navigate to top of page when moving between page
When Reconciling a large bank feed It would be good if the page went back to the top so that we did not have to scroll up every time.
At the moment when you get to the bottom and page forward it stays at the bottom of that screen2 votesNot a direct solution to what you're asking here, Tony. However you may find it a useful shortcut to press the 'Home' button on your keyboard which should bump you from the bottom to the top of any screen 😊
- Don't see your idea?