- or
No existing idea results
- ~ No ideas found ~
4612 results found
-
2 factor stripe
Activating a bank 2-Steps-Verification process or bank one-time pin when processing payments using stripe integration.
1 vote -
Contacts - Add more than 5 additional people
To be able to add more than 5 email addresses in a client so that you can email the invoice out to more that 5 people at a time.
17 votes -
Fixed assets: Capital Works Depreciation Schedules
We need more flexibility in depreciation schedules to add Second Hand Capital Works Assets for rental properties.
When you buy a second hand rental property, the capital allowances available under Div 43 needs to be calculated on the original cost, however, the total amount remaining to be claimed will be less than this original amount. Fixed Assets in Xero does not currently allow for this. We need to calculate the depreciation on a straight line basis based on the original cost, not what we paid for it and we need to be able to include an opening written down value, even though it was acquired in the current year.For example: client buys a 20 year old house as a rental property on 1 October 2022. The original capital works cost $100,000, however, only $50,000 is remaining to be claimed over the remaining 20 years at 2.5% on the original cost, (i.e. $1,875 in the first part year and then $2,500 per year thereafter.) If we register the asset as a new asset purchased this year, Xero does not allow us to put in an accumulated depreciation amount of $50,000.
We need more flexibility in depreciation schedules to add Second Hand Capital Works Assets for rental properties.
When you buy a second hand rental property, the capital allowances available under Div 43 needs to be calculated on the original cost, however, the total amount remaining to be claimed will be less than this original amount. Fixed Assets in Xero does not currently allow for this. We need to calculate the depreciation on a straight line basis based on the original cost, not what we paid for it and we need to be able to include an opening written down value,…6 votes -
Bank rule - Ability to set up overpayments to a supplier
We have standing orders set up for multiple properties for water rates, business rates, electricity and rent all of which are invoiced quarterly/six monthly/annually.
Can we have the ability to create bank rules for supplier overpayments to a contact??
4 votes -
Invoice/Bills - Notification when draft invoice automatically created
Send an email when a draft invoice (or bill) is created automatically.
When a draft invoice is created automatically, I want to be notified. By definition/design, it needs human attention before getting approved and issued. So I would like a human to be told it has happened.5 votes -
Tracking - Ability to bulk Archive categories
We use tracking categories of building jobs. It would be great to archive the tracking category once the job it complete. Allowing a P&L by tracking category report to only show active jobs.
118 votes -
UK Payroll - Unscheduled pay run in advance should only stop updates to staff included in the run.
UK Payroll - when an unscheduled pay run has been posted for a period it stops any updates to salaries even when a full payroll hasn't been posted. It makes sense that a full run would stop updates but only people included in an unscheduled pay run should be barred from having updates applied. For instance, with an unscheduled run posted I can't adjust starting dates or salaries for staff, and these may have changed after the unscheduled run was posted.
2 votes -
Find and Recode - Option to change invoices/bills back to draft
Is it be possible to add a section to 'find and recode' where you change status from approved back to draft? It would really help if hubdoc imports a number of documents incorrectly - tthen the fix can be done on bulk transactions
2 votes -
Invoicing - Longer Reference field
It would be better is the invoice reference could allow for input of longer names, without scrolling, so it's all on one line on the invoice.
Currently, the invoice number character length and the invoice reference character length are the same, which seems odd, as usually the invoice number is just a few characters, but the invoice reference can be long (project name, case name etc)13 votes -
AU Payroll - Automatically accrue leave on additional pay items
Have the option to accrue leave on other pay items. ie. Saturday rate has to be set up with its own rate per employee as each employee is on their own rate for Saturday and isn't a "mutplication of the ordinary rate". This also needs leave to accrue on it.
Spoken to Xero adviser and they don't have a set up for this yet.28 votes -
Products and Services - Add "In committed quotes" and "Quantity on order" to the columns in the main page & reports
This will allow a more accurate look on the stocks pre-ordered as well as incoming stocks. Instead of having to click each item to see it.
Even in the reports, it's great to see it so we can just generate a quick report about it.
2 votes -
Projects | Quotes - Add project title to reference field
I think the idea of Xero Projects is great. However, it requires a lot of hand-holding and reentering information to go through a project life cycle.
Here are my top 10 improvements I think would make a FAR smoother experience.
Pull through items quoted into the project as tasks once 'started'. This should be a bare minimum. At the moment tasks have to be manually added to any project.
Push the project title into the reference tag so it displays in the Xero invoice list (otherwise there is no high-level description of what the job is for an invoice). Or have Xero display the project title—this would be better.
Pull through the project name to the invoice (like the quotes do) so that the invoices have some reference. The title idea above would be a workaround for this same issue.
Seeing as you have to manually add the tasks to the project, and there is no way to add a description to the task at this stage, it would be good if the tasks used the default descriptions already added to Xero when creating an invoice. Currently, I have to delete the tasks and re-add them to generate the default descriptions.
Have a timer displayed in the browser tab (like Toggl does) for easy time checking.
Display the time for tasks using a consistent unit of measure ie 0:43m (not 71.76—whatever that is?) let's just stick with minutes for time stuff, eh?
Add a nice and simple way to 'close' a project (like the 'start project' from draft. (not buried in the ellipsis). This has a 'feel good' element to it, completing a task. Asana does this with a lot of flair when you tick off a task.
Have a more digestible report showing how many hours per staff were worked per day. (Toggl does this well.)
Increase Xero logout time to a day. Having to relog-in multiple times a day is frustrating.
I think the idea of Xero Projects is great. However, it requires a lot of hand-holding and reentering information to go through a project life cycle.
Here are my top 10 improvements I think would make a FAR smoother experience.
Pull through items quoted into the project as tasks once 'started'. This should be a bare minimum. At the moment tasks have to be manually added to any project.
Push the project title into the reference tag so it displays in the Xero invoice list (otherwise there is no high-level description of what the job is for an invoice). Or…
3 votesThat's a few points you've listed, Nicholas. Sorry it's taken a while to respond to you here, and do appreciate the feedback.
It's best for each point you've raised to be recorded as separate ideas so the community know what they're voting for, we can get a clear sense of interest in what customers are wanting to see, and we can keep you updated if a particular idea progresses.
We have a few ideas that have been started and appear to relate to things you'd like to see too, I've adjusted the title of your idea here to represent your point on adding the project title to the Quote reference but for the others I'd recommend starting new ideas for each of these so we can start to track the interest from the community.
- Projects | Connect Quotes and Deposits
- Projects - Keep timer on all pages
- Projects | Task Invoice - Show detail of time associated to task
- Login - extend login time (As you'll see from my last update on the idea this isn't something we have intentions of changing, However you may find the detail I've shared in the update useful to understand why)
That's a few points you've listed, Nicholas. Sorry it's taken a while to respond to you here, and do appreciate the feedback.
It's best for each point you've raised to be recorded as separate ideas so the community know what they're voting for, we can get a clear sense of interest in what customers are wanting to see, and we can keep you updated if a particular idea progresses.
We have a few ideas that have been started and appear to relate to things you'd like to see too, I've adjusted the title of your idea here to represent your point on adding the project title to the Quote reference but for the others I'd recommend starting new ideas for each of these so we can start to track the interest from the community.
-
GST Audit Report - Page number to appear at top and bottom of screen
GST Audit Report Page number selection to also appear at the top of the screen as well as the bottom of the screen. This would be beneficial to the user so they do not have to scroll down to the bottom of the screen to select what page they wish to review/go to. saving time for the end-user.
7 votes -
Xero Me - Live Timesheet Entry
Live timesheet entries will be awesome, instead of having to wait a whole fortnight to check entries from Xero Me(only when submitted), we can check them daily or on a regular basis.
6 votes -
sales invoices default landing tabs
When I save/submit for approval an invoice Xero always takes me back to the Sales Invoice "Drafts" tab - it would be great if the default was to take me back to the same tab
1 voteHi Carla, just to check when you say take you back to the same tab would that be the same list view that you started from or the same invoice that you have just saved?
-
AU Tax | Depreciation - Auto populate return when recouped on sale of property
depreciation recouped on sale of property should be populated into the relevant section of the return once it has been entered into the Rant
1 vote -
New invoicing | Send - Rich text editor format
Please change the editor in the email copy, when sending an email & creating an email template, to a rich text editor. It would be useful to be able to bold/highlight particular lines especially when invoices are late & reminders are being sent
20 votesHi everyone, while we appreciate and initially provided a solution for the idea here within the new invoicing email modal, we wanted to return as after further testing this feature has needed to be removed.
That said, we know being able to add basic formatting to your emails is important to some of our customers and while the tool bar has been removed you can still add basic html formatting to your emails to bold, add italics or underline text within the invoice emails you send to customers.
- Bold = <b> and </b>
- Italics = <i> and </i>
- Underline = <u> and </u>
We understand not all customers are familiar with these tags so I've added an example image that shows the different tags that can be added and how these will show instantly within the email preview so you can make sure you email looks as you expect.
If we make any further plans around adding a tool bar back into the email window we will be sure to keep you updated of this here.
Hi everyone, while we appreciate and initially provided a solution for the idea here within the new invoicing email modal, we wanted to return as after further testing this feature has needed to be removed.
That said, we know being able to add basic formatting to your emails is important to some of our customers and while the tool bar has been removed you can still add basic html formatting to your emails to bold, add italics or underline text within the invoice emails you send to customers.
- Bold = <b> and </b>
- Italics = <i> and </i>
- Underline = <u> and </u>
We understand not all customers are familiar with these tags so I've added an example image that shows the different tags that can be added and how these will show instantly within the email preview so you can make sure you email looks as you expect.
If…
-
Sales invoice - Don't auto update email of contact
Is it possible for cash sales/one off payments to chose not to save an email address? Every time I do a one-off cash sale for a new/random customer, the email address automatically saves into the Cash Sale contact file. But the next cash sale invoice is going to a different email address, so while I can input the new email address, the one prior is printed on the invoice! It is getting very tedious having to go into the contact file, delete the previous email address and get back into the new invoice to reprint it every time I do a cash sale - which is a lot!!
It would be great if you could add a prompt that gives you the choice of saving the email address to the client file (or not).Is it possible for cash sales/one off payments to chose not to save an email address? Every time I do a one-off cash sale for a new/random customer, the email address automatically saves into the Cash Sale contact file. But the next cash sale invoice is going to a different email address, so while I can input the new email address, the one prior is printed on the invoice! It is getting very tedious having to go into the contact file, delete the previous email address and get back into the new invoice to reprint it every time I do…
9 votesThanks for your feedback, Carolyn. Appreciate the different use case and why you may not want information from a singular invoice to update the contact. We'll get an understanding of the demand for this here.
In the meantime, it'd be good to understand if recording as Receive money could help your flow here for cash sales so you don't have to enter contact details?
-
Email Templates | Remittance - place holder for invoice number
Email Templates - Supplier remittance to include a place holder option for invoice number.
5 votes -
Bill Payments - Allow payments to be scheduled
When making a bill payment using open banking direct transfer from bank account, it would be nice to be able to schedule the payment - currently there is no ability to do that.
18 votesHi everyone, we have some updates in the UK with the bill payments method with Crezco. You now have more control of your cashflows with the ability to schedule bills to be paid at a future date using direct bank transfer. This helps to avoid potential bank charges for same day transactions, and missing due dates. Along with this you'll also be able to stay up to date with your payments with real-time payment status in Xero. Meaning you don't have to log into your bank to check the status of each bill payment. With an overview of all payments made using direct bank transfer, you have an accurate record of which suppliers have been paid, and when.
We know there are users from others regions also interested in the idea here and we'll share if there are any updates for expanding similar functionality in other places.
- Don't see your idea?