- or
No existing idea results
- ~ No ideas found ~
4821 results found
-
New Invoicing - Show Reply To email address when sending
New Invoicing - Show selected From Email
The old invoicing would show which Email address would be used as the from email when emailing an invoice to a client. This is an important double check to be sure I'm using the correct email address for the particular client. Since this has been removed I now have to remember to check the Email settings in a different tab before sending every invoice, which is very time consuming and is the primary reason I switch back to Classic every time I try the frustrating "New Invoicing" system after suffering through its hard to read product code text (tiny font size in a light grey colour lacking contrast) and lack of visible shipping address double checks, the lack of From Email is the missing feature that is the final straw for me to leave the new system and return to the Classic editor which is so much easier to see and use. See that the easy to use system is being discontinued in September, means it's important to get these missing features built into the new system.
New Invoicing - Show selected From Email
The old invoicing would show which Email address would be used as the from email when emailing an invoice to a client. This is an important double check to be sure I'm using the correct email address for the particular client. Since this has been removed I now have to remember to check the Email settings in a different tab before sending every invoice, which is very time consuming and is the primary reason I switch back to Classic every time I try the frustrating "New Invoicing" system after suffering through its hard…
18 votes -
Xero Accounting app - Bill receipt analysis
I normally add a copy(email download or photo) of any bill when loading it to Xero. It is easy to do with emailed bills but lets say a coffee bill, can take a lot of time. (Taking a photo, email it, download it and add it)
It would have been nice taking a photo of the bill through the Xero app to load it as a bill, from your phone.
If a owner operator buy something it would make it easier just going into the app, go into bills, take photo and load it there and then... done. (I am sure it should be possible that it could take all relevant information automatically from the bill into Xero, only leaving an "Approve" option to finalize the loading of the bill or "Save" as draft, if changes needs to be done and you want to do it later. (nothing to file, nothing to remember to do at a later stage)
This seams to be such a logic solution that I am sure there is software already available that I am just not aware of, but then again this will be at extra charges.... :-)I normally add a copy(email download or photo) of any bill when loading it to Xero. It is easy to do with emailed bills but lets say a coffee bill, can take a lot of time. (Taking a photo, email it, download it and add it)
It would have been nice taking a photo of the bill through the Xero app to load it as a bill, from your phone.
If a owner operator buy something it would make it easier just going into the app, go into bills, take photo and load it there and then... done. (I am…3 votes -
NZ Payroll - Employee leave sort by first name
Can you please consider adding an option under Employee> Leave to sort by employee first name. You already had an option to sort by surname however it would be great to also be able to sort by first name. Thanks
1 vote -
Contact - Ability to copy & paste bank account number (accept spaces not just hyphens)
When you try to add a new bank account to a contact, Xero only accepts numbers and hyphens in the field. Spaces are not accepted.
All invoices issued by Xero have the issuer's bank account on the invoice formatted with separating spaces between the number blocks.
So when entering a new contact, I can't just copy-paste the bank account number from the invoice that was created by Xero because the format of such number doesn't comply with the formatting in Xero contact section. Every time it has to be manually edited by all the thousands of Xero users.
It would be very nice if Xero followed the same formatting all the way through.
Can you change to format of bank account numbers on the invoices to hyphenated rather then the current space separated number blocks?
When you try to add a new bank account to a contact, Xero only accepts numbers and hyphens in the field. Spaces are not accepted.
All invoices issued by Xero have the issuer's bank account on the invoice formatted with separating spaces between the number blocks.
So when entering a new contact, I can't just copy-paste the bank account number from the invoice that was created by Xero because the format of such number doesn't comply with the formatting in Xero contact section. Every time it has to be manually edited by all the thousands of Xero users.
It would…
2 votes -
Report needs to have matching data for Total Cash In and Out dashboard widget
Need the report linked from dashboard's Total Cash In and Out to MATCH to the data shown on a report.
Right now it opens up a Bank Summary report which includes transfers, but even after removing transfers from the equation, the numbers still do not match up on the cash flow widget. I can't verify the cash flow widget's numbers.
1 vote -
Fixed asset - Increase limit of 500
existing threshold for Xero fixed assets is 500 - increase this to 5,000 to avoid having to use a separate app (which are clunky / expensive) to manage fixed assets
17 votes -
UK Payroll - Notification for cancelled leave
I have had a few scenarios where an employee requests leave and then I have gone into Xero and there are no requests. The employee has cancelled the request, but I have no visibility on this and so I have to reach out to the employee and check so could a notification be sent if an employee cancels a leave request before it is approved? Or if the leave request was left in Xero, but with a 'cancelled by employee' status or something? It is important to have visibility in some form.
8 votes -
UK Payroll | Working pattern - Allocate pay rate and allow multiple patterns per employee
I work for a company where our employees can work on multiple contracts with different pay rates and different working hours for example 2 hours tues and wed at £11.50ph and thurs at £11.75.
It would be useful if you could allocate an hourly rate to a specific working pattern and then be able to allocate multiple patterns to one employee
7 votes -
Manual Journals - Import additional lines into an existing manual journal
Since system allows to import manual journal with up to 300 lines cap, it would be of high value to have a feature to import additional lines into the existing manual journal (especially that we found an instruction on how to do that, but there is no functionality withing the Xero product)
Or as another alternative, if there is an option to merge existing manual journal entries than it will work perfectly as well.4 votes -
Bank feed to account transactions match report
It would be good to have a bank feed to account transactions matching report which could show which bank feed entries have been reconciled to which account transactions without having to click into each entry. Something like the attached would be good to enable someone to spot mismatched bank entries
1 voteHi David, it's possible to run the Account Transactions report showing a 'Related account' column to see where transactions have been reconciled to. Would this suit what you're asking here?
-
Credit Card due dates
Given XERO is pulling in credit card transaction details can they pull in payment due dates to help manage timing of payments? Could be as simple as a "Payment is due" flag that a user can manually turn off if they want after paying.
1 vote -
Creating budget in petrol service station business
I'm in a petrol service station business and would like to create a budget using litres sold/purchased as petrol prices fluctuate monthly.
1 vote -
Subscriptions / Billing - Report on dormant organisations that are being paid for
In regard to client monthly charges being oncosted via billing, would it be possible for you to run a report of any other files that are dormant. Files that are being paid for and not used?
2 votes -
Inventory - Create groups/combinations of items
Combo packages as in the required ladies, lawn mower lady weed eater lady trimmer lady and the rakers
17 votes -
Statements screen - Add invoice number
When showing a list of statements to send (from Business - Invoices - Send Statements) from Send Statements, can the invoice number be shown on the screen so sorting can be done on invoice number. Also the date of the invoice would be handy as well to give an idea of when first looking at the front screen as to how old they are. It would make choosing and sending quicker and more efficient.
2 votes -
NZ Payroll - Payday filing email reminder
NZ Pay Day Filing Reminder
To avoid missing the pay day filing requirement of two days within pay day, where an email reminder notification would be handy to pick up when a pay run has not been posted to the IRD, or if it were to be showing as an error, as the IRD penalty for missing this timing is steep.
4 votes -
Dashboard - Add custom shortcuts as required
It would be helpful to be able to add shortcut icons on the dashboard for all of the things you use every day instead of having to go through the dropdown menus. (similar to the way the old quickbooks used).
For example, have a way to put an "invoice" icon on the dashboard. Or add "spend money" on the dashboard. Basically have a way to add whatever shortcut icons you want as every business is different.
15 votesHi community - There are a few shortcuts that can help you get around and create transactions from many screens in Xero.
The '+' icon next to Search in the blue banner enables you to create a range of different document types, similarly there are shortcuts that can be entered in Search from the blue navigation bar that will take you to different features for example entering 'r' you can quickly select and be taken to 'All reports'
Are there other specific shortcuts you'd want to see here?
-
Email Templates - Create your own custom placeholders
Create your own placeholders for email templates - For example, I want to create a new placeholder for the previous month.
15 votesHi Kirsty, having looped in with the team this placeholder is not something that has been developed in new invoicing and isn't on the immediate plans at present.
For the time being, you'll be able to use the shortcut shared in classic invoicing. We'll re-open the idea to continue building traction in this here and I'll update you if there is any progress surrounding placeholders that'd help here.
-
UK Payroll - Process payments after employee has left
Please allow payments to be made to an employee after they have left and their P45 has been generated. Sage, for example, allows you to include past employees in a pay run and tick a 'payment after leaving' box which gives the correct 0T tax code and produces the correct FPS submission for HMRC. This is a very basic part of payroll that needs to be included in this system, the option to create a new employee file in order to pay them is not complying with HMRC and is not an acceptable alternative.
29 votes -
Projects - Increase maximum amount of digits allowed for Estimated Expense fields
Restricted to entering 9 digits before the decimal place in estimated expense unit price/total fields.
6 votes
- Don't see your idea?