4811 results found
-
Sales Invoices - Ability to bulk edit/update invoices
Ability to upload changes to existing invoices via csv.
Currently - When uploading a list of invoices that already exist, Xero will not allow the upload to continue. This feature would mean, that for any invoice that exists already, Xero would prompt the user whether they would like to update changes for existing invoices or not.
Purpose example - For invoices that need to have changes applied, for example amending the due date to an agreed revised payment due date. This change would enable the user to bulk update instead of needing to open each invoice manually and edit each…
86 votes -
Contacts - Allow macrons for languages (such as te reo)
We use another software programme which exports all our customer details and invoices etc into Xero automatically. The other programme uses Google to create addresses. A lot of the addresses include te reo, so include macrons. When the text is imported into Xero the macrons cause non-recognition of the characters, so we end up with a mess.
Surely in this modern world, Xero, an Aotearoa, New Zealand, developed programme, can be made to recognise our indigenous (Official) language, and allow correct te reo spellings.
This is 2022 not 1922, please allow us to get this basic NZ requirement correct. Xero…15 votesHi Karin, would it be possible to get a few more examples of names that you've tried to import and not have show with macrons?
One of our team have tested creating a contact via import with the name Whakatāne (/mækrn, me-/) and this created a contact in Xero as shown in this image.
It'd be great to better understand and see if we can look into this a bit more.
-
AU Payroll - Toggle rounding in pay templates
Turn off rounding in payroll deductions and superannuation in Pay Template. Is it possible to turn off rounding for payroll deductions in pay templates, as we have defined benefit member salary sacrifice percentage rates that are more than two decimals and Xero automatically rounds down or up which creates the designated ATO rate lower or higher than specified. Also payroll deduction amounts for Novated Leasing for pre and post tax amounts are rounding down or up to an amount which then we will have to create a journal later to fix the incorrect amount being direct debited from our bank…
5 votes -
User roles: Restrict access to Invoice Settings
For internal control reasons the 'invoice settings' section should be only accessible for certain access types. Anyone with Xero access (excl read only) can go and adjust the bank account manually entered on the invoices sent to customers.
It would be great to have this locked the same way bank account admin is for supplier payments.
11 votes -
Quotes - Approval process similar to invoices
Require functionality that allows quotes to be sent to management for approval before they can be sent out to customers.
Purpose: to reduce business risk and ensure prices / vendor terms are agreed and approved.11 votes -
Contacts - Ability to save 'Attention to' only for Billing or Postal address
Since the new contact layout was introduced, you cannot save an attention name without there being an address in the address field. Sometimes we do have a company name, contact name and no address.
Please review and correct.
8 votes -
AU Payroll - Assign multiple tracking categories to pay items
Create the ability to allocate payroll items (eg Wages & Super) to multiple sets of tracking categories within payroll.
The only way that wages can be allocated to tracking categories is via timesheets or Journals (and only one set of tracking categories is able to be included in the timesheet).
This would be really helpful for many NFP's who require the ability to use two sets of tracking categories for all their expenses including Wages & Super (One set of tracking categories for departments and another for funding sources/grants).
103 votes -
Reports: Show net profit or loss on Trial Balance report
Showing profit of Loss on Trial Balance (at both Client XERO Blue and advisor) Reports
At present the trial balance report does not show profit or loss, can or will XERO recode the report in client reports(XERO Blue) and in the advisor templates. This is something I believe all accountants and bookkeepers will welcome the change, as the would improve workflow.
Please refer to trial balance from competitors software (has printed that way for over 30 years)28 votes -
Bank Reconciliation: Bulk import recieved payments
Some of our customers are paying upwards of 100 invoices at one time. The ability to import a csv into Xero (that can be extracted from the remittance advice provided from the customer) would save a lot of processing time instead of manually using the Find & Match feature in the bank rec screen.
24 votes -
UK Payroll - Show full salary and YTD earnings
Before the update there were two greyed out boxes, when hovered over revealed the employee full salary and earnings to date - this was very handy when the salaries are based on an hourly rate. Where has this function gone? and can we have it back please.
5 votes -
Reports - View bank reconciliation narration in account transaction report
Description Field with the bank narration
This happened as a couple of newer client and new to xero in the contact field wrote something incredibly different to the bank narration which makes it very difficult to review the general ledger information.
For example in the General Account the transactions descriptions are all listed as "John Smith" when if the bank narration option was available I could see it is Officeworks, KFC, etc and this would make it easier to realise these are miscoded and reallocate.
34 votes -
Projects: Allocate to projects when bulk importing invoices
The Xero bulk invoice import template makes provision to allow for the population of data into the available tracking categories that would correspond to same inside Xero. However, is it possible to do same with a project? Xero have since confirmed it is not possible to include project allocations when importing invoices.
We have a high frequent need to import bulk lines of data each representing individual invoices, and we wish to use Xero projects, but need to be able to allocate the bulk upload of these invoices to the applicable projects inside Xero.
27 votes -
Projects: Update inventory when a tracked inventory item is added as an expense
Update inventory when it is posted as an expense to a project as this makes more sense as clients use the project reports to calculate WIP and it is annoying to have to constantly check which inventory figures have been applied and deduct this from the inventory. It also means when projects are billed this actually reduced the stock figure as this only happens when you invoice the project for the tasks and expenses whereas currently invoicing using the project amount does not update the inventory.
13 votes -
Expenses - Prevent users from submitting expense claims for locked periods
Xero should not allow employees to submit Expenses for locked periods. It must have a Posting Date & Document Date to facilitate this. The document date should always be what's on the invoice/receipt
13 votes -
User Role - Allow Admin Projects users to see custom project reports
There are users who need access to custom projects reports but no others. Currently they either have to repeatedly customise the base reports or have access to all the reports.
4 votes -
Files - Create bill in new tab
Would it be possible to create a bill from within the files tab, into a new tab. When you click create bill from within the file tab, it allows you to create the bill but once you click save, it just shows you the created bill. You then have to go back to the files tab and re-find the next file you want to create as a bill. Would be much easier if you could right click and create the bill within a new tab, so that the file tab stays open at all times.
Thank you!
15 votes -
AU Payroll: Include Working Holiday Maker field on Taxes tab
Under the new STP Phase 2 screens there is no-longer options on the 'Tax' tab to select Working Holiday Maker, rather just 'Australian resident' and 'Foreign resident'.
I understand on the 'Employment' tab you now need to make this selection, however, I've already had many users reach out confused thinking they need to select 'Foreign Resident' now.
My suggestion is to do one of the following:
Add Working Holiday Maker as an option and have it link back to the Employment tab if selected.
Add a text note in the 'Tax' tab section explaining the requirement to return to the…
1 voteHi Kielan, thanks for the idea. While we appreciate your feedback for where to select Working holiday maker, we want to be upfront that we don't have direct plans for making these changes in the foreseeable future.
As you’ve mentioned there is a placement to accomplish what you're asking here by selecting Working holiday maker in the employment tab under Income type.
-
Reports | Custom table - Reformat text
Xero Reporting - Please add functionality to Right Align text in custom tables in notes.
Also, Lots of white space on Depreciaiton schedules making text very small. Add functionality to drag column lines much like excel.
32 votes -
Permissions - Control user access to Xero Files
Adding security measures to the file tab - so only certain users can open and access that information
5 votes -
AU Payroll - Bulk add pay items to pay template
The ability to be able to multiple select earnings types when setting up the employee template.
Also with the ability to select Calculation Type - either Use Earnings Rate or Enter Rate.
If selecting 'Enter Rate' this can be input after the earnings lines are available - like usual.
11 votes
- Don't see your idea?