- or
2287 results found
-
UK Payroll - Timesheet filter for custom date range
I pay my staff on a monthly basis, but at the moment timesheet reporting can only be done weekly. Would it be possible to add a filter to be able to look at a custom date range.
4 votes -
Pre VAT Registration Date - amendments on Vat returns
It would be very useful if Xero stopped pulling amendments from transactions before the VAT registration date onto the VAT Returns.
EG. Some transactions before the VAT registration date had 20% VAT on them, these were corrected after the first VAT return was completed. Which then was pulled onto a VAT return resulting in a reclaim position rather than paying HMRC.
3 votes -
New invoicing - Don't open new tab when clicking the contact
Dont automatically open a new tab when clicking the contact link in the new invoice or give option to turn this off.
There is Alt+click shortcut on all browsers to do this already.
Making this auto open as default leads to too many unnecessary tabs and attributing to a more messy workflow8 votesThanks for your detailed feedback, everyone. We do find that customers have differing expectations of how clicking a link should behave.
With the current behaviour, opening the contact in a separate tab means that users don't lose any information they may have entered in the invoice.
We don't have any plans for changing this in the near term but it'll be good for us to continue to get a sense of the interest around this from our community here. If there are any changes that may impact this we'll share an update with you all here.
-
New Invoicing | Files - Bulk select to include all files with online Invoice
When adding many backup files to an Invoice it would save time if there was a check box to "attached ALL files to online Invoice" rather than having to tick each file.
6 votes -
Short term cash flow - Expected payment date based on history
It would help if the expected settlement dates for invoices (and bills) were based on past history rather than due dates
5 votes -
NZ Payroll - Show date leave was applied for in the leave request
Can the date leave was applied for and approved be added to a leave request?
4 votes -
Bills - Automatically adjust the date on imported draft bills to a set date
We use Xero on top of a project management system (Deltek PIM) which generates employee expenses and supplier invoices. When we export them to Xero they sit as draft bills which we approve. If users of PIM enter an invoice/expense for a prior period, the transaction has to be redated in Xero to prevent it changing the historic management accounts. My suggestion is that there is an option within Draft Bills that would redate draft transaction dates (before posting) to a given date, say 1st of the open period.
2 votesWe've reviewed your idea to adjust the date on imported bills to a set date automatically. It's now up to the community to get behind and support it. Make sure you share your idea with any colleagues that this could benefit so they can add their vote too!
Along with votes, other members can now comment to share additional detail about how your idea could improve their experience with Xero.
Thanks for sharing your idea, and letting us know the changes that matter most for you.
-
AU Payroll - Include DOB & start date in Employee Contact Details report
Ability to generate a report with start dates for all employees as well as birthday dates reports.
52 votes -
Account transactions - Common date for 'last week'
An option to set the date range to "last week" from the date range pull down options in account transactions reports.
Being able to create custom account transactions reports set to "last week" would be invaluable for our weekly reporting, avoiding fiddly changes to the date range each week when pulling a number of reports, and preventing any dating errors.
It would be a great advantage.
Should be an easy to add that option to Xero, I would have thought.
And it is a common option (e.g. GoCardless has it.)
2 votes -
New invoicing | Payments - Auto populate FX rates
To have the Xero Fx rate populate automatically, show up as a suggestion, or be able to be selected via drop-down list within the Payments screen when Fx is involved. Currently you have to open a new tab, go to settings/currency, enter you date and then copy/paste the Fx rate.
1 voteHi team, while this isn't in our plans right now, we'll track interest in this here and share if there's any change.
If coming across this idea you feel this'd be useful to you too, make sure to add your vote.
-
UK Payroll - Report showing PAYE obligation, due date and account code
Produce a report/statement in Xero or Xero Payroll which would inform my clients on how much to pay to HMRC, which HMRC account/sort code to use, what reference to use, and what date it should be at HMRC by.... available for each time a Payroll is run.
7 votes -
Repeating Invoices - Quantity of payments option
Repeating Invoices have the option to provide an optional 'End Date', however it can sometimes be difficult and/or time consuming to identify the correct end date. There's also potential to miscalculate the correct end date which can sometimes result in customers being under or over charged if the selected end date results in the wrong quantity of payments.
It would be very useful if there was a 'Quantity' option for Repeating Invoices which would automatically select the correct end date. Therefore eliminating over/under payments.
This feature would be useful for those who know exactly how many times…
7 votes -
Invoices - invoice a percentage of a task
Having the ability to invoice a percentage of each task in a project.
Our company invoices as a job progresses e.g 20% of one task is completed the first month, and then 50% has been completed the following month.
At this stage, I am only able to apply a 'discount' to alter the amount invoiced (while still maintaining the full contract amount on the invoice as a reference to clients). When doing this, it also marks that task as invoiced and I am unable to further invoice. The only alternative to this, is invoicing for a project amount and still…17 votes -
Billable Expenses - Retain source currency when invoicing expenses
When we rebill a transaction to a client that was already paid, if the amount is paid in Euros, for example €5,000, when I issue the next invoice to this customer, the expense automatically shows up to be included in this invoice. The issue is, when I choose this transaction, even though my invoice is also being billed in Euros, the amount is automatically converted to GBP (my company a/c's currency) and then is converted back to Euros so the amount to be rebilled shows us as a different figure either positively or negatively in my favour depending upon the…
5 votes -
New Invoicing | Attachments - Record Actions in History and Notes
All Actions relating to attached files should be recorded in History and notes, eg Attachment added from Files:Inbox, Attachment Downloaded, Attachment Deleted, Attachment returned to Files:Inbox
11 votes -
AU Payroll - Add a separate lock date for payroll
AUSTRALIA PAYROLL - Can we PLEASE have a separate Lock Date for Payroll. I have had many incidents where I have prepared an Activity Statement ( PAYG), and the client reverts a pay run to draft, makes a change AFTER THE ENDOF MONTH AND IAS CREATION, and then we have to re-calculate and re-submit IAS for signature.
The lock date is unable to be added as the ACCOUNTS are still being reconciled, but the payroll is complete.
This will also be extremely helpful at EOFY.
4 votes -
New Invoicing - show 4 decimal places on invoice (i.e. R44.1309)
I want more decimal places on the Line Amount and Invoice Total to display as follow:
1.7568 x 25.12 = 44.1309I can get it to show 44.1300 but I want to set it up to show 44.1309
5 votes -
Invoicing - Xero Network remember based on last send for contact
“Send via Xero Network” feature in your invoicing system, which have negatively impacted our workflow and client payment behavior.
Since the update, this option now appears at the bottom of the invoice, while the sending process begins at the top. This disjointed placement is not intuitive and often leads to it being overlooked. More importantly, the system does not remember this selection, requiring us to manually enable it every time we send an invoice.
This has had a direct impact on our cash flow. Since the update, we’ve noticed a significant drop in timely payments. Many…
2 votesThanks for your idea and sharing what would help your experience when sending using the Xero Network, Kelly.
We don't have further changes planned around this right now but will start to get a sense of interest from your idea, here.
-
New invoicing | Contact - Wrap full contact name(rather than truncate)
OLD vs NEW XERO INVOICING
Customer Name search - this is when adding customer name on customer/contact field when creating a new invoice
In the old version, the dropdown displays the full hospital name along with the contact email address. However, the new version only shows a truncated name (around 26-30 characters) without the email address. It would be better to retain the old version feature for this especially when there are multiple contacts but different departments, as it was easier to find out whether correct department was chosen and not to make additional right click just to be sure…
1 vote -
New invoicing | Online invoice - View supplier ABN
Why does the Supplier ABN not appear on the online invoice view? We now have to download the invoice as a PDF to see the ABN. This was not an issue with the Classic view.
2 votes
- Don't see your idea?