- or
No existing idea results
- ~ No ideas found ~
4883 results found
-
Profit & Loss - Default date of Custom category column to follow report date
In response to the "Custom Report - Update-able date column" idea (now closed), you recently added the option to 'Follow report date range' so your custom date columns will automatically update based on the date you run the report for.
Why (on earth!) is this not the default behaviour? This is what I thought should be happening and have spent ages, included a support session, trying to sort out the implication of it not working as expected. The column date should normally reflect the report date, surely.2 votes -
CIS - Include CIS Suffered in CIS reporting
A section for CIS suffered as like the current CIS deducted would be really useful. The reporting for CIS deducted is great and helps records for monthly PAYE. A similar section on the CIS suffered side would be great - checking through separate ledgers and updating RTI filings is manual in contrast.
4 votes -
UK Payroll - Add a remuneration report
UK doesn't currently have the remuneration report. This is a basic fundamental requirement on payroll.
37 votes -
AU Payroll - Increase the character limit for Earnings rates on timesheets
Timesheet - Earnings Rate viewing space needs increasing
Why is the space so small to view the earing rate selected, most earning rates are much longer than the space provided, which is creating issues to clarify if the rate selected is correct. And creating additional time required to check the correct rate has been entered or pulled through from scheduling software.
Please widen this space, there is plenty of room as there is excess room in the Tracking area or the page actually widened.4 votes -
Reports - Show invoice number in GST F5 Return
When running the Transactions by box number tab of the GST F5 Return, the Invoice Number will not be shown if we have already entered a reference on the invoice.
If there is no reference entered, Xero will then show the Invoice Number under the 'Reference' column instead. Screenshot attached.
This makes it difficult to do checking as most users do use the reference when creating invoice but showing the reference usually does not have much significance to the accountant/bookkeeper who is doing the checks for GST submission.
We do hope that the Invoice Number column can also be shown in the Transactions by box number tab of the GST F5 Return report.
Thanks!
When running the Transactions by box number tab of the GST F5 Return, the Invoice Number will not be shown if we have already entered a reference on the invoice.
If there is no reference entered, Xero will then show the Invoice Number under the 'Reference' column instead. Screenshot attached.
This makes it difficult to do checking as most users do use the reference when creating invoice but showing the reference usually does not have much significance to the accountant/bookkeeper who is doing the checks for GST submission.
We do hope that the Invoice Number column can also be shown…
20 votes -
New invoicing - Ability to archive
Archive invoices that are not paid on time, to avoid depleting stock levels and to still keep a record of what was sent.
1 voteThanks for confirming, Karla. We'll start to feel out the interest of this here. It's not in our direct plans atm, but if there's any plans made we'll be sure to let you know, here.
-
Customer Statement - Show links to credit notes
Please can the hyperlinks to Credit Notes appear on the statements of customer accounts? We have so many queries to send credit notes after statements are sent out because there is no hyperlink to it on the statement, time consuming and unnecessary.
5 votes -
Inventory - Add a Quantity on Order column to the Inventory Item Summary report
Would it be possible to be able to select Quantity on Order as a column option in the Inventory Item Summary report.
Such feature would greatly enhance the product overview in this report.10 votes -
Chart of Accounts - Ability to assign Foreign Currency to an account
I would like to be able to have a foreign currency account in the COA other than bank accounts. If an invoice is received and paid in a foreign currency, it should show as the foreign currency as the source, not the base currency. This affects loan accounts a lot and if invoices are paid from a loan account, instead of a bank account, you can't keep the currency consistent.
57 votes -
AU Payroll - Field for Preferred Name
Add a box to payroll for an employee's preferred name, for those who don't use their legal name as their everyday contact, it doesn't need to link to ATO, so no major coding, just be there for reference when contacting the employee. I have several clients with staff that use their middle name or a different version of their first name, that they prefer when being addressed, and it being there in payroll would simplify things.
70 votes -
Avalara - Canadian Xero Accounts
US Xero Clients have Avalara built into Xero as the Auto Sales Tax feature. With legislation changing significantly around Sales Tax in the US, Canadian Companies who sell into the US would really benefit from having the same feature available to them.
3 votes -
Contacts - Show the value of an allocated credit note and the bill/invoice it's allocated to
On the contacts page you can see the bills and the value, it will either appear with the value in the paid column or the due column unless it has been allocated against a credit. Any allocated credit notes and the invoices they have been allocated to appear as £0.00 in the paid and due column. Now as we have to allocate the credits in order to include them in a bulk payment (a completely pointless time consuming exercise still not addressed by XERO! but lets not get side tracked by another basic function missing) the fact the values are reduced to £0.00 makes it hard work when trying to check a statement etc. I know there are reports etc that can be run to show the transactions that are reported to a contact but I just want to be able to look at the contacts page. There either needs to be a 3rd column that shows the transaction value then have it either in the due or paid column or any allocated credit note and the relating bill / invoice needs to have the amount shown in the paid column and not £0.00
I wondered if it was a glitch with the new contacts page but apparently not - this has been done deliberately for some unknown reason.On the contacts page you can see the bills and the value, it will either appear with the value in the paid column or the due column unless it has been allocated against a credit. Any allocated credit notes and the invoices they have been allocated to appear as £0.00 in the paid and due column. Now as we have to allocate the credits in order to include them in a bulk payment (a completely pointless time consuming exercise still not addressed by XERO! but lets not get side tracked by another basic function missing) the fact the values are…
15 votes -
Find and recode - Save or favourite a search
We have to use find and recode each month for adjusting certain batches of transactions. These are the same combination of searches used monthly to find and recode.
It would be useful to be able to name and save or favourite search criteria for quick recall each month. (Looking back at previous searches is ok, but not obvious which is which until you click into them).
7 votes -
Cheques - Print cheques for Canadian companies
Set Cheques up properly for Canadian Companies.
Canadian companies should be able to print cheques properly at the bottom, and we should be able to use blank cheque stock.
5 votes -
Payable Invoice Details report - Option to display bank details
Need option to display supplier bank details when running the supplier payments bank report. Key for bank approvers to easily verify bank details for supplier payments.
47 votesSee where you're coming from and thanks for the confirmation, Malcolm (I've just slightly adjusted the title here 🙂)
This isn't something we have planned at present but will get a sense of the appetite here and let you know if there's any change.
-
US Sales Tax - Auto Tax LCA alert
if the address pulls up in a LCA that is not currently added, to have the ability to register that LCA to allow the correct tax rates? That would make it easier to know that the LCA is new and needs to be registered.
1 vote -
New Invoicing - Change pop up location for message "default contacts have been applied"
Please change the location of the pop up message "default contacts have been applied". When creating a new invoice, the pop up message appears in the bottom left, but I'm trying to look at my contact info and enter data. The pop up box lingers too long and covers the information I need to enter, interfering with the data entry! This is frustrating every time when creating multiple invoices and I have to "x" the pop up message away each time, which then causes extra steps and takes longer. Data entry is all about efficiency and less steps/clicks..you have created more work with this feature. I'd suggest placing the pop-up message on the top bar above the contact field, as other messages. We can read it, but it doesn't interfere with invoicing fields.
Please change the location of the pop up message "default contacts have been applied". When creating a new invoice, the pop up message appears in the bottom left, but I'm trying to look at my contact info and enter data. The pop up box lingers too long and covers the information I need to enter, interfering with the data entry! This is frustrating every time when creating multiple invoices and I have to "x" the pop up message away each time, which then causes extra steps and takes longer. Data entry is all about efficiency and less steps/clicks..you have created…
1 vote -
Sales Overview - Search within descriptions on invoice lines
Be able to search for a particular term within invoices. For instance as service that is not often invoiced. Could then allow you to copy that particular invoice to a new invoice.
5 votes -
AU Payroll - Delegated timesheet approvers
I have different managers responsible for different employee timesheets so therefore I would really like the ability to authorise specific managers to employees. Am still using mostly paper timesheets because of the massive deficiencies in the XeroMe ones (think is one of the many reasons).
I don't think its appropriate that anyone authorised can access all timesheets as it does nothing but create confusion and the potential to authorise the wrong ones. Also unnecessarily time consuming.
Is it possible to please add some tickboxes/controls to remove this hurdle?21 votes -
Shopify - Multicurrency support
Xero and Shopify integration - Currency should not be an issue to connect both apps, foreign currency should be taking into consideration. A company can be having sales in different currency to different country. Xero and shopify please look into this issue to ensure the integration doesnt limit by the based currency for both apps.
6 votesWe're grateful for your engagement and letting us know the changes that matter to you.
While we don't have any plans for extending our Shopify integration for this atm, we're watching the votes and support for this through the idea here and will share if there are any plans made.
- Don't see your idea?