4807 results found
-
Hubdoc - Choose Billable Expense or assign directly to Projects
Project Assigning in Hubdoc. It would be most useful if our accounting team could choose between a Billable Expense and Assign to a Project in Hubdoc. We have many small expenses that have to be assigned to projects, as the client has already paid in most cases. We have to find each one, which is a challenge, open the bill, and assign each one manually. It is so time-consuming. So much processing time. Please consider this, it would be so appreciated.
5 votes -
Contact - Font color
If we cannot put a warning against the bad payers, surely it cannot be that hard to be able to change the customers business names into another color (Red) So when you search or create a new invoice, alarm bells will ring and hopefully avoid more loss
5 votesHi Todd, have you seen credit limits? These will allow you to set a limit to how much spending a customer can make with your business. When they reach that limit you can also choose whether to restrict invoicing for that customer. This may help with the scenario you're noting here.
-
Repeating Invoice - automatically calculating days of the month in the qty field
Repeating Monthly Invoices:
Can we have a feature where monthly invoices have the ability to automatically calculate the days in that month based on the date in the "next invoice date". Therefore it doesn't need to be manually changed. Eg Monthly repeating invoice. next Invoice date - 1 November 2024. Qty - 30
5 votes -
New invoicing - Increase size of item code display
The item code on the New invoicing shows much smaller that it was on the Classic Invoicing. Example attached shows how much harder it is to read. Can this be enlarged?
5 votes -
New invoicing - Retain formatting and special characters in Contact 'To' field
It's good to see you have extended the period before removing classic invoicing because I still need to revert to classic for certain features that are missing from the new system, namely:
- The ability to copy invoices to Bills and PO's - this is an important feature that I use regularly
- Send invoices via Xero network - again this is a feature that has been useful especially for invoicing between subsidiaries.
- Save and continue feature, I don't like the auto save feature because it continues to update the history and notes while I am still adding details to the invoice…
5 votesAppreciate your feedback here, Helen. We already have existing idea that we've added your vote to for the first 3 points you've shared. You'll receive any updates of progress for these separately. I'll just adjust the title for your idea here to reflect your last point around the formatting of a contact name. We'll let you know if there is any change planned for this, here.
-
Invoicing - Move Delete Button
Is it possible to move the delete button away from approve button in Sales Overview.
When approving invoices, have too be very careful with delete button right beside approve.Cheers
Gene5 votes -
Fixed assets - Pooling assets for NZ version
Fixed Assets - Tax Pooling Depreciation. Australia has a feature to put assets into pools and calculate depreciation. This would be very useful in NZ
5 votes -
AU Payroll - Long Service Leave's Liability calculated and 'live' for reports within Xero
LSL liability calculations are currently handled externally to Xero.
It would be nice to have a system which could automatically track LSL on staff, similar to asset depreciation.5 votes -
Xero - Maintain previous design style in Xero
Keep the Xero Classic Look everyone preferred.
The design of the New Invoicing, Bills and Fixed Assets pages are sadly reminiscent of an excel spreadsheet.
One of the enjoyments of the Xero software compared to its competitors are the fresh, clean pages that make it inviting to use. When changing to new function, Xero has changed its design elements and is missing the 'attractiveness' that has been part of Xero's signature branding.
Specifically black text, flat checkboxes, grey cell borders and grey column headers makes it feel like an outdated 1990s program.
I am hearing similar comments from my clients.…
5 votesAppreciate your feedback here, and I've shared this back with our teams at Xero. We want to be upfront that as we continue to develop Xero products and features and update technology, this will ultimately result in some change to designs, actions and flows.
Product ideas here is a great place to share what improvements we can make in specific features or how we could develop new features that would enable you to grow your businesses.
As we make decisions around new experiences we're keeping customers front of mind. Our product teams regularly review feedback and consider asks from our community in product ideas. We also do thorough testing before changes are released, to try and make transitions as smooth as possible for our customers.
-
Aged receivable summary - Include prepayments/deposits for future invoices.
For the Aged Receivables it would be helpful to know what customers owe us as well as what we owe them. We take deposits for future invoices and they don't show on the Aged REceivable Summary.
5 votesPerhaps the Receivable Invoice Summary or Detail reports would accommodate your needs here? Omitting the aging periods this report can be filtered to only show the Status and Source(Receivable Prepayment, Receivable Invoice etc.) of transactions you'd like to see.
-
Report - Contact created date
Report to see when a customer account was opened/set up. When conducting customer credit account reviews it would be handy if there was a report to see what date a customer account was set up. So you are only reviews accounts that have been opened for a year. At the moment the only way to see when an account was set up is to look at the notes/history on each individual account.
5 votes -
UK Payroll - CIS Suffered Report, Correct Xero to allocate credit notes correctly
IDEA - CIS suffered report to calculate the CIS suffered correctly.
ISSUE - If you apply a credit note to an invoice that has both CIS labour and CIS materials, Xero does not calculate the CIS suffered correctly. Even though the credit note is coded to the correct nominal code, Xero doesn't recognise this. This causes the CIS suffered report to reduce the deduction amount which is incorrect. This means the figure you submit to HMRC is lower than it should be. Meaning less of a refund of CIS suffered than it actually should be.
5 votes -
Reports | Budget Variance - Add line highlight
As someone who is colour blind, I find the Budget Variance Arrows are similar / same colour which makes viewing budget variance at a glance a challenge.
It would be great to have an option to have lines highlighted a colour if above/below budget instead. Even better if this colour option was customisable.
5 votes -
Projects - Better assignment of expenses
It would also be a lot more practical to assign the expenses to projects in just the same way as it's done in invoices, instead of assigning them via the project tab. I notoced that not all expenses are taken into account and I had to go back to each bill to redo the project assignment to make sure that everything is accounted for, and even then, i find that there are still gaps.
The invoice project assignment method has the merit of showing what was assigned or not.
Having said this, it would also be very useful to have…5 votes -
UK Payroll - Link payroll with expenses
I think it would be fantastic if expenses were able to be linked to payroll/ pay run. Expenses are great and the app is really easy to use but from a processing point, most firms pay with their the payroll. You currently you have to create a expense suspense and clear the expenses to that and then manually add the expenses to payroll which also get posted to the expense suspense- it all a bit of a hassle and would be fantastic if the expenses could just be added to payroll, in the same way the leave does.
5 votes -
New invoicing - sending invoice reminder in a closed period
New Invoicing - currently wont allow me to send an invoice (as a reminder for payment) if it is in a locked period. Which i don't understand as it is not affecting the accounts in any way.
It is very time consuming having to download and then email from google, rather than straight from Xero as before.5 votes -
New invoicing - Change layout of buttons/options
What's most wrong with the new invoicing template is that the most useful features have been shifted to to the bottom of the layout , so you have to scroll to the bottom to use them. Also the default of approve and send is not the best option , approve would be better ( or perhaps a way to choose that box default would be terrific. Also to attach files , all the way to the bottom we go, thats crazy . also the size of the template is too big , it needs to be more compact its adds…
5 votesThanks for feeding back to us here, Mark. I want to assure you our product teams and leadership are very attentive to the feedback we've been receiving from customers on the new invoicing experience and we're committed to improving this.
It helps for each of the points you've raised to be tracked separately so our teams can consider the votes as a factor when prioritising and planning development, as well as keeping the communication clear of the changes we're making.
Many of the things you've shared are being worked on and we have separate ideas for these that I've listed below and welcome you to join and vote for each, if you'd like.
Trying to get a better view of the placement of buttons that you mentioned - would this just be the Attach files option or is there another that you would like to see shifted above, too?
- New…
-
New invoicing - Hide Tax Rate column
In New Invoicing we can now hide the tax amount column. As this is for organisations that are not registered for tax, the Tax Rate column is also redundant so would it be possible to hide that too? We are set up as No VAT Scheme so both these columns just get in the way and it seems odd that we can mask one but not the other when you only ever need both or neither.
While we're at it, could we do the same in Billing?
Thanks
5 votes -
Prepaid Expense Manager
My Idea: Somewhere to enter a prepaid annual or longterm expense (ie Insurance) that can first go into a Prepaid Expenses asset account and then set to either expense at regular intervals until "used up" or able to manually expense as periods come to a close. This manager would help keep track of all prepaid expenses in one place and would keep a running balance for each item. Viewing options would include being able to filter/sort by item (ie 2023 Insurance Premium), or by type (ie software subscriptions) or by expense account (ie Insurance Expense).
5 votesHi team, while we don't have a direct feature that would automate the entire process, there is a way to record and do this in Xero.
You could set up an account for the expense in your Chart of accounts, and reconcile the original payment to this account. You could then set up a repeating bill or invoice template to auto generate and you'd make payments on it to the same account to reduce the balance over a period of time.
-
New Invoicing - View Exchange Rate Used
It’s not possible to view the original invoice exchange rate in New Invoicing. New invoicing only shows the current exchange rate. I have to revert to classic invoicing to see what rate was used when posting the invoice.
5 votes
- Don't see your idea?