- or
76 results found
-
AU Payroll - Set Payment Date for Unscheduled pay run
Unscheduled pay run - most of my unscheduled pay runs are paid on the day of creation.
It would be good to be able to change the payment date to the actual date of payment instead of the date selected by the unscheduled pay run.E.g. unscheduled pay run for the week ending 13th Aug has a payment date of 16th Aug yet payment may have been made on 18th Sep.
4 votesHi all, if you've created an unscheduled pay run and wish to change the payment date, you can do this by clicking the payment date title in a draft pay run.
-
AU Payroll - Include terminated employees in pay runs for backpay
When processing backpay for employees where they have a Termination Date currently involves either an Unscheduled Pay run for a period the employee was employed or undo the Termination date, and run a payrun, then Terminate again.
Both of these are very time consuming, particularly when there are some 40 employees over an 18 month period that need to be included who have a Termination date.
It would be useful to have a function in a payrun to "include terminated employees" which keeps all the previous data, but includes them for the backpay without having to manual update each, just…3 votesHi everyone, it's currently possible to have terminated employees included in unscheduled pay runs, that are prior to their termination date.
If you're experiencing any issues with this, reach out to our specialists at Support who can help 1-1.
-
AU Payroll - Edit posted pay runs
You should be able to edit any payrun that hasn't been 'filed' regardless if it was the last one or not. I enter several unscheduled payruns and I've noticed an error in one but I can't fix it because it wasn't the last payrun posted. The "work-around" Xero recommends is to File it and then re-post a counter fix. This feels redundant and unnessary extra work. Essentially its saying I can post an inverse of the original to cancel it out which isn't a tidy way of doing work.
1 voteHi Jamie, just coming back across your idea here. In Xero Payroll as of right now if you've a posted pay run that you need to make adjustments to, you can revert this to draft and make the required changes.
The only time we wouldn't recommend doing this is if the pay run's been filed with the ATO.
Once it's been filed we'd recommend using unscheduled pay runs to make any changes. This is because reverting a filed pay run to draft will cause issues in the reporting to the ATO.
-
UK Payroll - V NI Category start date
Tried to amend the national insurance category to a v category for 6 weeks after the employees start date, as that is when they were valid from, to find the calendar will only allow me to amend to a date previous or on their start date with the company. Has anyone else encountered this issue at all?
1 voteHi Laura, it looks like you also raised a support case about this which has since been resolved.
To recap, when you add a V category, you'll have the option to enter a date in which the category starts from. Then you would need to enter the date in which the employee was first employed as a civilian.
For example, V category is valid from 31 Jan, therefore you can only enter the employment civilian date up until 31 Jan. You won't be able to enter an employment date after the NI category date.
-
AU Payroll - Expand columns on Pay Employees screen
In pay employees, add pay run the column last edited isn't wide enough to show the full description. It would be helpful to be able to read the whole description of when the entry was last edited. It would also be helpful to know who entered and edited the pay entry.
If new staff are in training and have completed the data entry but are nervous to speak up if an error was found/made knowing exactly who entered it would help to educate that staff member no what might have gone wrong.1 voteLooping back across your idea here, Kristy - you can view this from the History at the bottom of the screen. This'll show details of changes made to that pay run with the dates, times, the user and the change that was made, which should help identify and educating staff 🙂
-
AU Payroll - Superannuation Authorisation Message - Resend authorisation code
Adding a "Resend authorisation code" link on the approval page for a batch.
Purpose: To make sure authorisation code is sent for an approval, in case the code hasn't been received.
5 votesHey community - we've delivered this idea 🎉
If the nominated authoriser hasn’t received the SMS, you can Resend a new code from within the Pending Approval super batch.
-
Payroll UK: Import annual leave from planday to xero
The ability to import annual leave from Planday to Xero so you are not creating it twice on both platforms.
1 voteHi Chris, thanks for your idea here. Understand you may have completed the process yourself by now, but incase you have other orgs you're looking to set up and for others that may be looking for the same - We've released new Switching Wizard in Payroll for the UK.
This'll make it easier to transition from your current payroll provider to Xero Payroll, reducing errors and saving you time.
As part of the experience, you'll be able to import a Full Payment Summary(FPS) from your current software provider to Xero Payroll. You can get more understanding of how this works on our website and through our short video.
-
AU Payroll - Do not update historical payslips when new leave balances are added
We recently had an employee which had a leave type reinstated after a period of over 12 months of it not being used. There was a balance sitting in there for the duration of time that it wasn’t active, and therefore not showing on any payslips that were provided to the employee or filed. We are now in a position that we had to reactive this leave type to be in line with STP requirements and showing leave loading on a separate line. When we reactivated this leave type, ALL payslips for the period of over 12 months were updated…
2 votesHey Amy, I know it's been a little while since you started your idea here. Taking another read through the situation you described, there are a couple of options which depend on whether you need a record of the adjustment.
- If you do need a record of the adjustment you'd want to post an unscheduled pay run to reverse out the leave balance for the pay period in which it should have been paid out.
- In the case you don't need a record, you could simply adjust the opening balance for the leave type within the employee's record.
We have help for both of these processes detailed in this article on Xero Central.
-
AU Payroll - Edited leave request date, email notifies employee of the wrong date
Edited Leave request date sends a notification to the employee for the wrong date. We recently had an employee request an RDO for 19/07/2024. After discussion with the employee this date was not suitable because the employee was due to provide training to a customer this date so we agreed to change the date to the following week (26/07/2024).
I then edited the leave request to be for the 26/07/2024 and approved the request.
The employee received an email notification that their request for leave on the 19/07/2024 was approved!
The employee then contacted me because they were confused and…
2 votesThanks for raising this, Chris and apologies we haven't responded sooner. This was an issue that our product team picked up and I can confirm we released a fix so the date will now show correctly.
-
AU Payroll: Ultimate Plan with 30 Employees Subscription Option
There should be more employee options in the ultimate subscriptions between 20 & 50 employees as there are small businesses out there that will never have 50 employees on the books per month but have more than 20. Even if the subscription points going up by 10 to accomodate this.
1 voteHi Cynthia, we appreciate your feedback, and this will be shared with our teams. However, we do not accept ideas about Xero pricing plans or plan structures and cannot make commitments to ideas of this nature.
You can read more about submitting ideas on our Xero Central article.
-
Payroll Activity Details (AU) - Date column to be added back
There has always been a date column - add it back - why mess with something that has been used for so many years. Absolutely so desruptive to our professional services.
1 voteHiya Simona, sorry for not updating you on this sooner.
Shortly after the release of the new report our team made a change based on feedback, so the report now shows Employee name and Date as separate columns, and the columns will be included when running the report by default.
-
Timesheets - New design has limited functionality
I have observed that the timesheets section in the payroll system has been updated. However, this update appears to have introduced several questionable design choices that hinder its functionality and efficiency.
Firstly, the employee list is not sorted alphabetically, which complicates the process of locating specific individuals. Secondly, the system no longer autofill's the default earnings rate, requiring unnecessary manual input. Thirdly, upon clicking the "Approve Timesheet" button, a redundant popup appears asking for confirmation of the approval, despite the action already being explicitly initiated. Lastly, when entering hours worked into a field, the system fails to clear the default…
18 votesHi everyone, while we appreciate your feedback about the updates to Timesheets with quite a few points raised in the one post we are going to move this to feedback. I want to assure you your feedback here has been shared with our product teams - however, if there are specifics that you'd like to see developed in the new timesheets we ask that you create ideas for each that we can then get a sense of the community in and keep you updated through - See the qualities of an idea on Xero Central. 🙏
-
AU Payroll - Remove the letter "t" from Sept in the month field
Remove the letter "t" from Sept in the month field as all other months are only 3 characters long
1 voteHi Rolf, I wanted to share an update as running back across your idea here there is a bit of logic at play that determines the way a date is shown on reports in Xero.
Abbreviations for reports are determined by an organisation's region and align with modern accepted format. This means while some organisations in Xero may show a date as 'Sep' another may show as 'Sept'.
An example of this is for AU, NZ and UK organisations the accepted format is to show September as 'Sept' when abbreviated.
We appreciate some customers may want this to appear differently but want to be open that we intend to continue alignment with accepted formatting. Thanks
-
Xero Me: Allow multiple timesheet entries in one day when using start and end times
Add the ability to Xero / Xero Me for multiple time sheet entries per day.
For staff who work across multiple sites having the ability to add multiple time entries per day and either select a client to associate those entries against, or add a note for each time sheet entry would be fantastic.
Ultimately you would allow up to 6 time entries per day.Example
Monday
Time Entry1= 8:00 - 11:30am (note= site 1)
Time Entry2= 12:00 - 3:30pm (note= site 2)
Time Entry3= 3:30pm - 5:00pm (note = site 3)Doing this would improve the functionality and uptake…
6 votesHey team, apologies we've not got back to you here sooner. Our product team have implemented a change so you can now enter the start and end times in a timesheet, which enables you to enter time spend in multiple locations.
-
Spend / Receive money - Ability to set tracking defaults
Allocate specific tracking categories to transactions instead of showing every category when a transaction is created.
Currently all tracking categories show when creating a new spend/receive money. In our business one of these categories is used for timesheets only. I would like the option to be able to choose which tracking categories display when creating new spend/receive money transactions in Xero, in the same way that I am able to do this for payroll and on invoicing.
3 votes -
Allow tax adjustments on Bank Transactions added via API
In the Xero interface, both an Invoice and a Bank Transaction can be given a tax adjustment, e.g. to resolve a rounding error.
Via the API, only an Invoice can be given a tax adjustment. If sending a POST request with the exact same structure/data to create a Bank Transaction, the tax adjustment is ignored.
This doesn't make sense given that the tax adjustment on the Bank Transaction is possible via the UI.
Please amend this so that API POST requests to create Bank Transactions respect the TaxAmount field on the Line Item.
1 voteHi Virgil, thanks for your feedback on API tax adjustments. It’s helpful to understand where you’re seeing a gap between the UI and what’s currently possible through the API.
We’ve moved this idea to Feedback, which means it’s now closed for votes and comments. Because this relates specifically to API functionality, the best next step is to raise it in our developer community, where the team who work directly with API enhancements can review it in more detail.
If you can share your workflow and how this limitation affects your integration when you post there, it will help provide useful context for the developer community.
- Don't see your idea?